|
EPR-85 Datasheet, PDF (1/32 Pages) Power Integrations, Inc. – Engineering Prototype Report for EP 85 - 2 W Charger using LinkSwitch-LP | |||
|
Title
Engineering Prototype Report for EP-85 â
2 W Charger using LinkSwitch®-LP
(LNK564P)
Specification 90 â 265 VAC Input, 6 V, 330 mA Output
Application
Low Cost, Line Frequency Transformer Based
Charger Replacement
Author
Power Integrations Strategic Marketing Department
Document
Number
EPR-85
Date
04-Oct-2005
Revision
1.0
Summary and Features
⢠Low cost, low part count solution (only 14 components)
⢠Proprietary IC and Circuit technology enable Clampless⢠design and very
simple Filterfuse⢠input stage
⢠Integrated LinkSwitch-LP safety/reliability features
⢠Over-temperature protection â tight tolerance (+/-5%) with hysteretic
recovery for safe pcb temperature under all conditions
⢠Auto-restart output short circuit and open-loop protection
⢠Extended pin creepage distance for reliable operation in humid
environments - >3.2 mm minimum at package
⢠EcoSmart® â Easily meets all existing and proposed international energy
efficiency standards â China (CECP) / CEC / EPA / European Commission
⢠No-load consumption 140 mW at 265 VAC
⢠64.9% average efficiency measured to CEC spec (versus target 55.2%)
⢠Ultra-low leakage current: <5 µA at 265 VAC input â No Y cap
⢠Meets EN550022 and CISPR-22 Class B EMI with >9 dBµV margin
⢠Meets IEC61000-4-5 Class 3 AC line surge
Power Integrations
5245 Hellyer Avenue, San Jose, CA 95138 USA.
Tel: +1 408 414 9200 Fax: +1 408 414 9201
www.powerint.com
|
▷ |