PM5362-1 Datasheet, PDF (151/354 Pages) –

PM5362 TUPP-PLUS
DATA SHEET
PMC-951010
ISSUE 6 SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR
ESEI:
The ESEI bit reports and acknowledges the status of elastic store error
interrupts for tributary TU #1 in the corresponding TUG2. Interrupts are
generated upon FIFO underflows and overflows. ESEI is set high when an
elastic store error occurs and is cleared immediately following a read of this
register, which also acknowledges and clears the interrupt. ESEI remains
valid when interrupts are not enabled (PEE set low) and may be polled to
detect elastic store error events.
PJEI:
The PJEI bit reports and acknowledges the status of the positive pointer
justification event interrupts for tributary TU #1 in the corresponding TUG2.
When the MONIS bit is set high, interrupts are generated upon reception of a
positive pointer justification event in the incoming stream. When the MONIS
bit is set low, interrupts are generated upon generation of a positive pointer
justification event in the outgoing stream. PJEI is set high when a positive
pointer justification event occurs in the monitored stream and is cleared
immediately following a read of this register, which also acknowledges and
clears the interrupt. PJEI remains valid when interrupts are not enabled (PEE
set low) and may be polled to detect positive pointer justification events.
NJEI:
The NJEI bit reports and acknowledges the status of the negative pointer
justification event interrupts for tributary TU #1 in the corresponding TUG2.
When the MONIS bit is set high, interrupts are generated upon reception of a
negative pointer justification event in the incoming stream. When the MONIS
bit is set low, interrupts are generated upon generation of a negative pointer
justification event in the outgoing stream. NJEI is set high when a negative
pointer justification event occurs in the monitored stream and is cleared
immediately following a read of this register, which also acknowledges and
clears the interrupt. NJEI remains valid when interrupts are not enabled (PEE
set low) and may be polled to detect negative pointer justification events.
SS[1:0]:
The SS[1:0] bits reports the value of the size bits in the V1 byte of tributary
TU #1 in the corresponding TUG2. The SS[1:0] bits are not filtered and must
be software de-bounced.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 131