BUK1M200-50SGTD Datasheet, PDF (6/15 Pages) NXP Semiconductors – Quad channel logic level TOPFET

Philips Semiconductors
BUK1M200-50SGTD
Quad channel logic level TOPFET
6. Static characteristics
Table 5: Static characteristics
Limits are valid for −40 °C ≤ T_sp ≤ +150 °C and typical values for T_sp = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Min Typ
Off-state output characteristics
V_DS(CL) drain-source clamping voltage
V_IS = 0 V; I_D = 10 mA
V_IS = 0 V; I_D = 200 mA; t_p ≤ 300 µs;
δ ≤ 0.01; Figure 18
50
-
50
62
I_DSS
drain-source leakage current
On-state output characteristic
V_IS = 0 V; V_DS = 40 V
T_sp = 25 °C; Figure 19
-
-
-
0.05
R_DSon drain-source on-state resistance
Input characteristics ^[1]
V_IS ≥ 4 V; t_p ≤ 300 µs; δ ≤ 0.01;
I_D = 100 mA
T_sp = 25 °C; Figure 8 and 9
-
-
-
150
V_IS(th) input-source threshold voltage
I_IS
input supply current
V_DS = 5 V; I_D = 1 mA
T_sp = 25 °C; Figure 13
normal operation
V_IS = 5 V
V_IS = 4 V
protection latched
0.6 -
1.1 1.6
100 220
80
195
V_IS(rst) input-source reset voltage
t_rst(latch) latch reset time
V_IS(CL) input-source clamping voltage
R_IG
input-gate resistance
Overload protection characteristic ^[5]
V_IS = 5 V
V_IS = 3 V; Figure 14 and 16
t_rst ≥ 100 µs; Figure 17
I_I = 1.5 mA; Figure 15
1.4 2
0.7 1.1
[2] _1.5
2
[3] ₁₀
40
5.5 -
[4] _-
2.5
I_D(th)(trip) drain current trip threshold
4 V ≤ V_IS ≤ 5.5 V
T_sp = 25 C; Figure 11
Figure 10
4
6.1
3
6.1
Overtemperature protection characteristic
T_j(th)
threshold junction temperature
Source drain diode characteristic
4 V ≤ V_IS ≤ 5.5 V; Figure 12
150 170
V_SD
source-drain (diode forward)
voltage
I_S = 2 A; V_IS = 0 V; t_p = 300 µs
-
0.83
Max
-
70
100
10
380
200
2.4
2.1
400
330
2.5
1.5
2.5
100
8.5
-
8
9
-
1.1
Unit
V
V
µA
µA
mΩ
mΩ
V
V
µA
µA
mA
mA
V
µs
V
kΩ
A
A
°C
V
[1] The supply for the logic and overload protection is taken from the input.
[2] The input voltage below which the overload protection circuits will be reset.
[3] To reset the protection circuitry from the latched state, V_IS is reduced from 5 V to 1 V.
[4] Not directly measurable from device terminals.
[5] The TOPFET switches off to protect itself when one of the overload thresholds is exceeded. It remains latched off until reset by the
input.
9397 750 10955
Product data
Rev. 01 — 31 March 2003
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
6 of 15