English
Language : 

PMEG6030ELP_15 Datasheet, PDF (3/15 Pages) NXP Semiconductors – 60 V, 3 A low leakage current Schottky barrier rectifier
NXP Semiconductors
PMEG6030ELP
60 V, 3 A low leakage current Schottky barrier rectifier
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VR
reverse voltage
Tj = 25 °C
IF
forward current
Tsp = 150 °C; δ = 1
IF(AV)
average forward current
δ = 0.5; f = 20 kHz; Tamb ≤ 75 °C;
[1]
square wave
δ = 0.5; f = 20 kHz; Tsp ≤ 155 °C;
square wave
IFSM
non-repetitive peak forward
tp = 8 ms; Tj(init) = 25 °C; square wave
current
Ptot
total power dissipation
Tamb ≤ 25 °C
[2]
[3]
[1]
Tj
junction temperature
Tamb
ambient temperature
Tstg
storage temperature
Min Max Unit
-
60
V
-
4.2 A
-
3
A
-
3
A
-
70
A
-
750 mW
-
1250 mW
-
2500 mW
-
175 °C
-55 175 °C
-65 175 °C
[1] Device mounted on a ceramic Printed-Circuit Board (PCB), Al2O3, standard footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
9. Thermal characteristics
Table 6.
Symbol
Rth(j-a)
Thermal characteristics
Parameter
thermal resistance
from junction to
ambient
Conditions
in free air
Rth(j-sp)
thermal resistance
from junction to solder
point
Min Typ Max Unit
[1][2] -
-
200 K/W
[1][3] -
-
120 K/W
[1][4] -
-
60
K/W
[5]
-
-
12
K/W
[1] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse
power losses PR are a significant part of the total power losses.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
[4] Device mounted on a ceramic PCB, Al2O3, standard footprint.
[5] Soldering point of cathode tab.
PMEG6030ELP
Product data sheet
All information provided in this document is subject to legal disclaimers.
7 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved
3 / 15