SA606_15 Datasheet, PDF (20/33 Pages) NXP Semiconductors – Low-voltage high performance mixer FM IF system

NXP Semiconductors
SA606
Low-voltage high performance mixer FM IF system
Table 9. Automatic test circuit component list
Component
Description
C1
100 pF NPO ceramic
C2
390 pF NPO ceramic
C5, C9, C14, C17, C18,
100 nF  10 % monolithic ceramic
C21, C23, C25, C26, C27
C6
22 pF NPO ceramic
C7
1 nF ceramic
C8, C15
10 pF NPO ceramic
C10
10 F^[1] tantalum (minimum)
C12
2.2 F
C27
2.2 F  10 % monolithic ceramic
FL1, FL2^[2]
ceramic filter Murata CFUKF455KB4X-R0
IFT1
455 kHz (Ce = 180 pF) Toko RMC-2A6597H
L1
147 nH to 160 nH Coilcraft UNI-10/142-04J08S
L2
0.8 H nominal; Toko 292CNS-T1038Z
R9
2 k  1 % 1/4 W metal film
R10
10 k  1 %
R11, R14
10 k  1 %
R12
2 k  1 %
R13
20 k  1 %
R17
2.4 k  5 % 1/4 W carbon composition
R18
3.3 k
R19
16 k
X1
44.545 MHz crystal ICM4712701
[1] This value can be reduced when a battery is the power source.
[2] This a 30 kHz bandwidth 455 kHz ceramic filter. All the characterization and testing are done with this
wideband filter. A more narrowband 15 kHz bandwidth 455 kHz ceramic filter that may be used as an
alternative selection is Murata CFUKG455KE4A-R0.
SA606
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 8 November 2013
© NXP B.V. 2013. All rights reserved.
20 of 33