SA606_15 Datasheet, PDF (16/33 Pages) NXP Semiconductors – Low-voltage high performance mixer FM IF system

NXP Semiconductors
SA606
Low-voltage high performance mixer FM IF system
Table 8. SA606DK demo board component list
Component
Description
C1
51 pF NPO ceramic
C2
220 pF NPO ceramic
C5, C9, C14, C17, 100 nF  10 % monolithic ceramic
C18, C21, C23, C26
C6
5 pF to 30 pF trim cap
C7
1 nF ceramic
C8, C15
10.0 pF NPO ceramic
C10
10 F tantalum (minimum)
C12
2.2 F  10 % tantalum
C19
390 pF  10 % monolithic ceramic
C27
2.2 F tantalum
FL1, FL2^[1]
ceramic filter Murata CFUKF455KB4X-R0
IFT1
330 H Toko 836AN-0129Z
L1
0.33 H Toko SCB-1320Z
L2
1.2 H
X1
44.545 MHz crystal ICM4712701
R5^[2]
not used in application board
R10
8.2 k  5 % 1/4W carbon composition
R11
10 k  5 % 1/4W carbon composition
R17
2.4 k  5 % 1/4W carbon composition
R18
3.3 k  5 % 1/4W carbon composition
R19
11 k  5 % 1/4W carbon composition
[1] This a 30 kHz bandwidth 455 kHz ceramic filter. All the characterization and testing are done with this
wideband filter. A more narrowband 15 kHz bandwidth 455 kHz ceramic filter that may be used as an
alternative selection is Murata CFUKG455KE4A-R0.
[2] R5 can be used to bias the oscillator transistor at a higher current for operation above 45 MHz.
Recommended value is 10 k.
SA606
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 8 November 2013
© NXP B.V. 2013. All rights reserved.
16 of 33