TDA8776 Datasheet, PDF (2/20 Pages) NXP Semiconductors – 10-bit, 500 Msps Digital-to-Analog Converter DAC

Philips Semiconductors
10-bit, 500 Msps Digital-to-Analog
Converter (DAC)
Product specification
TDA8776
FEATURES
• 10-bit resolution
• Conversion rate up to 500 MHz
• 10K/100K ECL input levels
• Internal reference voltage generator
• No deglitching circuit required
• Internal input register
• Power dissipation only 925 mW (typical)
• Internal 50 Ω output load (connected to the analog
ground)
• Very few external components required.
APPLICATIONS
High-speed digital-to-analog conversion for:
• High resolution video and graphics
• Direct Digital Synthesis (DDS)
• Telecommunication
• High-speed modems.
GENERAL DESCRIPTION
The TDA8776 is a 10-bit Digital-to-Analog Converter
(DAC) for high resolution video and other high frequency
applications. It converts the digital input signal into an
analog output voltage at a maximum conversion rate of
500 Msps. No external reference voltage is required and
all digital inputs are 10K/100K-ECL compatible.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
V_EEA
V_EED
V_EEI
I_EEA
I_EED
I_EEI
V_OUT − V_OUT
INL
DNL
f_clk(max)
t_S1
P_tot
analog supply voltage
digital supply voltage
input stages digital supply
voltage
analog supply current
digital supply current
input stages digital supply
current
full-scale analog output voltage
(peak-to-peak value)
DC integral non-linearity
DC differential non-linearity
maximum clock frequency
settling time (differential)
total power dissipation
note 1
−5.46
−5.46
−5.46
note 1
−
note 1
−
note 1
−
notes 1 and 2; Z_L = 50 Ω 1.7
note 3
−
note 3
−
500
10% to 90% full scale; Fig.9 −
−
−5.20
−5.20
−5.20
108
60
10
2.0
±0.3
±0.2
−
0.5
925
−4.94
−4.94
−4.94
145
85
15
2.5
±0.5
±0.45
−
−
−
V
V
V
mA
mA
mA
V
LSB
LSB
MHz
ns
mW
Notes
1. D0 to D9 connected to either HIGH or LOW level, CLK is HIGH and CLK is LOW.
2. The analog output voltages (V_OUT and V_OUT) are negative with respect to AGND (see Table 1). The external output
resistance between AGND and each of these outputs is typically 50 Ω.
3. A warm-up time is necessary to reach optimal performances.
ORDERING INFORMATION
TYPE NUMBER
TDA8776K
NAME
PLCC28
PACKAGE
DESCRIPTION
plastic leaded chip carrier; 28 leads
VERSION
SOT261-2
1996 Jun 04
2