|
TDA4851 Datasheet, PDF (2/17 Pages) NXP Semiconductors – Horizontal and vertical deflection controller for VGA/XGA and autosync monitors | |||
|
◁ |
Philips Semiconductors
Horizontal and vertical deï¬ection controller for
VGA/XGA and autosync monitors
Preliminary speciï¬cation
TDA4851
FEATURES
⢠VGA operation fully implemented including
alignment-free vertical and E/W amplitude presettings
⢠4th VGA mode easy applicable (XGA, Super VGA)
⢠Autosync operation externally selectable
⢠Low jitter
⢠All adjustments DC-controllable
⢠Alignment-free oscillators
⢠Sync separators for video or horizontal and vertical TTL
sync levels regardless of polarity
⢠Horizontal oscillator with PLL1 for sync and PLL2 for
flyback
⢠Constant vertical and E/W amplitude in autosync
operation
⢠DC-coupling to vertical power amplifier
⢠Internal supply voltage stabilization with excellent ripple
rejection to ensure stable geometrical adjustments
GENERAL DESCRIPTION
The TDA4851 is a monolithic integrated circuit for
economical solutions in VGA/XGA and autosync monitors.
The IC incorporates the complete horizontal and vertical
small signal processing.
VGA-dependent mode detection and settings are
performed on chip. In conjunction with TDA4860/61/65,
or TDA8351 (vertical output circuits) the ICs offer an
extremely advanced system solution.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
VP
IP
Vi sync
positive supply voltage (pin 1)
supply current
AC-coupled composite video signal with negative-going sync
(peak-to-peak value, pin 9)
sync slicing level
DC-coupled TTL-compatible horizontal sync signal (peak-to-peak value,
pin 9)
slicing level
DC-coupled TTL-compatible vertical sync signal (peak-to-peak value,
pin 10)
slicing level
Io V
Io H
Tamb
vertical differential output current (peak-to-peak value, pins 5 and 6)
horizontal sink output current on pin 3
operating ambient temperature range
MIN. TYP. MAX. UNIT
9.2 12 16
V
â 40 â
mA
â1â
V
â 120 â
mV
1.7 â â
V
1.2 1.4 1.6 V
1.7 â â
V
1.2 1.4 1.6 V
â1â
mA
â â 60
mA
0 â +70 °C
ORDERING INFORMATION
EXTENDED TYPE
NUMBER
PINS
TDA4851
20
Note
1. SOT146-1; 1996 November 26.
PIN POSITION
DIL
PACKAGE
MATERIAL
plastic
CODE
SOT146(1)
November 1992
2
|
▷ |