|
TDA4851 Datasheet, PDF (10/17 Pages) NXP Semiconductors – Horizontal and vertical deflection controller for VGA/XGA and autosync monitors | |||
|
◁ |
Philips Semiconductors
Horizontal and vertical deï¬ection controller
for VGA/XGA and autosync monitors
Preliminary speciï¬cation
TDA4851
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Horizontal output (open-collector)
Fig.6
V3
output voltage LOW
tp/tH
tH duty factor
VP
threshold to activate under voltage
protection
âtH
jitter of horizontal output
E/W output
I3 = 20 mA
I3 = 60 mA
â
â
â
â
42
45
horizontal output off â
5.6
horizontal output on â
5.8
f = 31 kHz
â
â
f = 64 kHz
â
â
f = 100 kHz
â
â
note 2
0.3 V
0.8 V
48
%
â
V
â
V
3.5 ns
1.9 ns
1.2 ns
V11
bottom output signal during mid-scan
(pin 11)
top output signal during ï¬yback
temperature coefï¬cient of output signal
E/W amplitude adjustment (parabola)
internally stabilized
Fig.7
1.05 1.2
4.2 4.5
â
â
1.35 V
4.8 V
250 10-6/K
V14
input voltage (pin 14)
I14
adjustment current
100% parabola
typically 28% parabola
â
â110
â
5.0
â120
0
â
V
â135 µA
â
µA
Notes to the characteristics
1. âIo/ât relative to value of Mode 3.
2. Parabola amplitude tracks with mode-dependent vertical amplitude but not with vertical amplitude adjustment.
Tracking can be achieved by a resistor from vertical amplitude potentiometer to pin 14.
November 1992
10
|
▷ |