80C451 Datasheet, PDF (2/22 Pages) NXP Semiconductors – 80C51 8-bit microcontroller family 4K/128 OTP/ROM/ROMless, expanded I/O

Philips Semiconductors
80C51 8-bit microcontroller family
4K/128 OTP/ROM/ROMless, expanded I/O
Product specification
80C451/83C451/87C451
DESCRIPTION
The Philips 8XC451 is an I/O expanded single-chip microcontroller
fabricated with Philips high-density CMOS technology. Philips
epitaxial substrate minimizes latch-up sensitivity.
The 8XC451 (includes the 80C451, 87C451 and 83C451) is a
functional extension of the 87C51 microcontroller with three
additional I/O ports and four I/O control lines for a total of 68 pins.
Four control lines associated with port 6 facilitate high-speed
asynchronous I/O functions.
The 8XC451 includes a 4k × 8 ROM (83C451) EPROM (87C451), a
128 × 8 RAM, 56 I/O, two 16-bit timer/counters, a five source, two
priority level, nested interrupt structure, a serial I/O port for either a
full duplex UART, I/O expansion, or multi-processor
communications, and on-chip oscillator and clock circuits. The
80C451 ROMless version includes all of the 83C451 features except
the on-board 4k × 8 ROM.
The 87C451 has 4k of EPROM on-chip as program memory and is
otherwise identical to the 83C451.
The 8XC451 has two software selectable modes of reduced activity
for further power reduction; idle mode and power-down mode. Idle
mode freezes the CPU while allowing the RAM, timers, serial port,
and interrupt system to continue functioning. Power-down mode
freezes the oscillator, causing all other chip functions to be
inoperative while maintaining the RAM contents.
FEATURES
• 80C51 based architecture
• Seven 8-bit I/O ports
• Port 6 features:
– Eight data pins
– Four control pins
– Direct MPU bus interface
– Parallel printer interface
• On the microcontroller:
– 4k × 8 ROM (83C451)
4k × 8 EPROM (87C451)
ROMless version (80C451)
– 128 × 8 RAM
– Two 16-bit counter/timers
– Two external interrupts
• External memory addressing capability
– 64k ROM and 64k RAM
• Low power consumption:
– Normal operation: less than 24mA at 5V, 12MHz
– Idle mode
– Power-down mode
PIN CONFIGURATION
9
1
10
61
60
LCC
26
44
Pin Function
1 EA/V_PP
2 P2.0/A8
3 P2.1/A9
4 P2.2/A10
5 P2.3/A11
6 P2.4/A12
7 P2.5/A13
8 P2.6/A14
9 P2.7/A15
10 P0.7/AD7
11 P0.6/AD6
12 P0.5/AD5
13 P0.4/AD4
14 P0.3/AD3
15 P0.2/AD2
16 P0.1/AD1
17 P0.0/AD0
18 V_CC
19 P4.7
20 P4.6
21 P4.5
22 P4.4
23 P4.3
27
Pin
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
43
Function
P4.2
P4.1
P4.0
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
RST
P3.0/RxD
P3.1/TxD
P3.2/INT0
P3.3/INT1
P3.4/T0
P3.5/T1
P3.6/WR
P3.7/RD
P5.0
P5.1
P5.2
Pin Function
47 P5.3
48 P5.4
49 P5.5
50 P5.6
51 P5.7
52 XTAL2
53 XTAL1
54 V_SS
55 ODS
56 IDS
57 BFLAG
58 AFLAG
59 P6.0
60 P6.1
61 P6.2
62 P6.3
63 P6.4
64 P6.5
65 P6.6
66 P6.7
67 PSEN
68 ALE/PROG
SU00084A
1998 May 01
2
853-0830 19327