BFU530_15 Datasheet, PDF (17/22 Pages) NXP Semiconductors – NPN wideband silicon RF transistor

NXP Semiconductors
BFU530
NPN wideband silicon RF transistor
10.2 Application example: 866 ISM band LNA
866 ISM band LNA, optimized for low noise.
More detailed information of the application example can be found in the application note:
AN11430.
9_&&9
—)
Q)
ȍ
5)LQSXW
60$
Q+
0XUDWD
/4:VHULHV
S)
S)
Nȍ
Q+
0XUDWD
/4:VHULHV
S)
S)
Nȍ
'87
Q+
0XUDWD
/4:VHULHV
5)RXWSXW
60$
Fig 26. Schematic 866 MHz ISM band LNA
DDD
Remark: fine tuning of components maybe required depending on PCB parasitics.
Table 11. Application performance data at 866 MHz
I_CC = 10 mA; V_CC = 3.6 V
Symbol Parameter
Conditions
s₂₁²
insertion power gain
NF
noise figure
IP3_o
output third-order
f₁ = 866.1 MHz; f₂ = 866.2 MHz;
intercept point
P_i = 30 dBm per carrier
Min Typ
- 16
- 1.1
- 17
Max Unit
-
dB
- dB
- dBm
BFU530
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 5 March 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
17 of 22