PI2EQXDP101-A Datasheet, PDF (5/11 Pages) Pericom Semiconductor Corporation – 1 to 1 DisplayPort ReDriver

PI2EQXDP101-A
1 to 1 DisplayPort™ ReDriver™
Maximum Ratings
(Above which useful life may be impaired.For user guidelines, not tested.)
Storage Temperature........................................................ –65°C to +150°C
Supply Voltage to Ground Potential.................................... –0.5V to +4.6V
DC SIG Voltage..........................................................–0.5V to V_DD +0.5V
Current Output ................................................................-25mA to +25mA
Power Dissipation Continuous........................................................ 500mW
Operating Temperature.............................................................. 0 to +85°C
Note:
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is
a stress rating only and functional operation of the device
at these or any other conditions above those indicated in
the operational sections of this specification is not implied.
Exposure to absolute maximum rating conditions for ex-
tended periods may affect reliability.
DC Electrical Characteristics (V_DD33 = 3.3V ±5%, V_DD15 = 1.5V ±5%, T_A=0°C to 85°C)
Power Supply Characteristics
Symbol
Parameters
Condition
Min. Typ.
I_{ACTIVE_VDD15} Current into V_DD15 when active
4-lanes operating at 2.7Gbps
150
I_{STANDBY_VDD15} Current into V_DD15 when standby
I_{ACTIVE_VDD33} Current into V_DD33 when active
4-lanes operating at 2.7Gbps
0.1
I_{STANDBY_VDD33} Current into V_DD33 when standby
P_ACTIVE
Total active power
4-lane, operating 2.7Gbps
P_standby
Total standby power
Max.
250
10
1.0
0.1
400
20
Units
mA
mA
mA
mA
mW
mW
HPD_SRC, HPD_Sink , CAD, CAD_Sink, Pin Charaxteristics
Symbol
Parameters
Condition
VIH
LVTTL input high voltage
VIL
LVTTL input low voltage
IIH
Input High-level current
IIL
Input Low-level current
VOH
LVTTL high level output voltage
IOH=-8mA
VOL
LVTTL low level output voltage
IOL= 8mA
Min. Typ.
2
43
6
2.4
Max.
0.8
80
20
0.4
Units
V
V
uA
uA
V
V
AUX_SRC±, DDC_SCL/AUX+, DDC_SDA/AUX– pins (When configured as SCL and SDA pins)
Symbol
Parameters
Condition
Min. Typ.
IIH
Input High-level current
43
IIL
Input Low-level current
6
Max.
80
20
Units
uA
uA
AUX_SRC±, DDC_SCL/AUX+, DDC_SDA/AUX– pins (When configured as AUX± pins)
Symbol
Parameters
Condition
Min. Typ. Max.
IIH
Input High-level current
IIL ^10-0194 Input Low-level current
5
43 80
6
2^P0^-0.3
Units
uA
uA^07/09/10