PI3VDP411LST Datasheet, PDF (4/11 Pages) Pericom Semiconductor Corporation – Digital Video Level Shifter for dual mode DP signals w/ inverting buffer for HPD signal

PI3VDP411LST
Digital Video Level Shifter for dual mode DP
signals w/ inverting buffer for HPD signal
Maximum Ratings (Above which useful life may be im-
paired. For user guidelines, not tested.)
Storage Temperature.....................................–65°C to +150°C
Supply Voltage to Ground Potential.............–0.5V to +5V
DC Input Voltage..........................................–0.5V to V_DD
DC Output Current.......................................120mA
Power Dissipation.........................................1.0W
Note: Stresses greater than those listed under MAXIMUM RATINGS
may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
Table 2: Signal Descriptions
Pin Name
Type
OE#
5.5V tolerant low-voltage
single-ended input
IN_D4+
IN_D4–
IN_D3+
IN_D3–
IN_D2+
IN_D2–
IN_D1+
IN_D1–
OUT_D4+
OUT_D4–
OUT_D3+
OUT_D3–
Differential input
Differential input
Differential input
Differential input
Differential input
Differential input
Differential input
Differential input
TMDS Differential output
TMDS Differential output
TMDS Differential output
TMDS Differential output
Description
Enable for level shifter path
OE# IN_D Termination OUT_D Outputs
1
>100KΩ
High-Z
0
50Ω
Active
Low-swing diff input from GMCH PCIE outputs.
IN_D4+ makes a differential pair with IN_D4–.
Low-swing diff input from GMCH PCIE outputs.
IN_D4– makes a differential pair with IN_D4+.
Low-swing diff input from GMCH PCIE outputs.
IN_D3+ makes a differential pair with IN_D3–.
Low-swing diff input from GMCH PCIE outputs.
IN_D3– makes a differential pair with IN_D3+.
Low-swing diff input from GMCH PCIE outputs.
IN_D2+ makes a differential pair with IN_D2–.
Low-swing diff input from GMCH PCIE outputs.
IN_D2– makes a differential pair with IN_D2+.
Low-swing diff input from GMCH PCIE outputs.
IN_D1+ makes a differential pair with IN_D1–.
Low-swing diff input from GMCH PCIE outputs.
IN_D1– makes a differential pair with IN_D1+.
HDMI 1.3 compliant TMDS output. OUT_D4+
makes a differential output signal with OUT_D4–.
HDMI 1.3 compliant TMDS output. OUT_D4–
makes a differential output signal with OUT_D4+.
HDMI 1.3 compliant TMDS output. OUT_D3+
makes a differential output signal with OUT_D3–.
HDMI 1.3 compliant TMDS output. OUT_D3–
makes a differential output signal with OUT_D3+.
07-0191
4
PS8906A
08/28/07