MN103SK0 Datasheet, PDF (7/11 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SK0/K1 Series
Features (continued)
 Serial Interface (continued)
Serial 1 (Full duplex UART / Synchronous serial interface)
Synchronous serial interface
Overrun error detection
Transfer clock source: 1/2, 1/4, 1/16 and 1/64 of timer 0 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 1 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 2 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 3 underflow, IOCLK/2, IOCLK/4, SBT1 pin
Can be selected as the first bit to be transferred, Any transfer size from 1 to 8 bits can be selected.
Continuous transmission, reception, and transmission/reception
Maximum transfer rate: 5.0 Mbps
Full duplex UART
Parity check, Overrun and flaming error detection
Transfer clock source: 1/32, 1/64, 1/256, and 1/1024 of timer 0 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 1 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 2 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 3 underflow, IOCLK/32, IOCLK/64
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Continuous transmission, reception, and transmission/reception
Maximum transfer rate: 300 kbps
Serial 2 (Full duplex UART / Synchronous serial interface)
Synchronous serial interface
Parity check, Overrun error detection
Transfer clock source: 1/2 and 1/16 of timer 0 underflow,
1/2 and 1/16 of timer 1 underflow,
1/2 and 1/16 of timer 2 underflow,
1/2 and 1/16 of timer 3 underflow, SBT2 pin
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Maximum transfer rate: 3.0 Mbps
Full duplex UART
Parity check, Overrun and flaming error detection
Transfer clock source: 1/16 of timer 0 underflow, 1/16 of timer 1 underflow,
1/16 of timer 2 underflow, 1/16 of timer 3 underflow
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Maximum transfer rate: 375 kbps
Serial 3 (Full duplex UART / Synchronous serial interface)
Synchronous serial interface
Parity check, Overrun error detection
Transfer clock source: 1/2 and 1/16 of timer 0 underflow,
1/2 and 1/16 of timer 1 underflow,
1/2 and 1/16 of timer 2 underflow,
1/2 and 1/16 of timer 3 underflow, SBT3 pin
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Maximum transfer rate: 3.0 Mbps
Full duplex UART
Parity check, Overrun and flaming error detection
Transfer clock source: 1/16 of timer 0 underflow, 1/16 of timer 1 underflow,
1/16 of timer 2 underflow, 1/16 of timer 3 underflow
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Maximum transfer rate: 375 kbps
Ver. AEM
7