MN103SK0 Datasheet, PDF (6/11 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SK0/K1 Series
 Features (continued)
 A /D Converter
Minimum conversion time
1.0 ms
MN103SFK0K: 20 channels, 3 converters
MN103SFK1K: 16 channels, 3 converters
Use of 3 converters allows simultaneous sampling of 3 phases
A/D conversion start trigger is in synchronization with complementary 3-phase PWM cycle and 16-bit timer
 Complementary 3-phase PWM output
Min. resolution: 16.7 ns
Triangular and saw-tooth waves output
Incorporates a dead time insertion circuit
Can overwrite registers by double buffer during PWM operation
PWM output protection circuit supporting external interrupts and non-maskable interrupt
Output timing varying function
 Serial Interface
4 channels
Serial 0 (Multi-master IIC / Synchronous serial interface)
Synchronous serial interface
Overrun error detection
Transfer clock source: 1/2, 1/4, 1/16 and 1/32 of timer 0 underflow,
1/2, 1/4, 1/16 and 1/32 of timer 1 underflow,
1/2, 1/4, 1/16 and 1/32 of timer 2 underflow,
1/2, 1/4, 1/16 and 1/32 of timer 3 underflow, IOCLK/2, IOCLK/4, SBT0 pin
Can be selected as the first bit to be transferred, Any transfer size from 1 to 8 bits can be selected.
Can be continuously transmitted, received or transmitted and received.
Maximum transfer rate: 5.0 Mbps
Multi-master IIC
7-bit or 10-bit slave address can be set.
Supports General call communication mode.
6
Ver. AEM