MN103SFM9K Datasheet, PDF (7/25 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SFM9K
32-bit Single-chip Microcontroller
PubNo. 232M9-010E
Synchronous serial interface
- Overrun error detection
- Transfer clock source
1/2, 1/4, 1/16, and 1/64 of timer 14 underflow,
1/2, 1/4, 1/16, and 1/64 of timer 15 underflow,
1/2, 1/4, 1/16, and 1/64 of timer 16 underflow,
IOCLK/2, IOCLK/4, SBT2 pin
- Can be selected as the first bit to be transferred,
Any transfer size from 2 to 8 bits can be selected.
- Continuous transmission, reception, and transmission/reception
- Maximum transfer rate: 5.0 Mbps
Full duplex UART
- Parity error, overrun error and flaming error detection
- Transfer clock source
1/32, 1/64, 1/256, and 1/1024 of timer 14 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 15 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 16 underflow,
IOCLK/32, IOCLK/64
- Can be selected as the first bit to be transferred,
Any transfer size from 7 to 8 bits can be selected.
- Continuous transmission, reception, and transmission/reception
- Maximum transfer rate: 300 kbps
Regulator
incorporates regulator, and use of 5 V power supply is possible
Power Supply Detection (Auto reset circuit)
Detection level 3.6 V to 4.3 V
When power supply voltage is under detection level, reset is generated.
Port / pins
I/O ports
Motor control output
External interrupt
A/D input
Special pins
Reset input pin
Oscillation pin
Test pin
Power pin
81 pins
12 pins
9 pins
20 pins
17 pins
1 pin
2 pins
3 pins
11 pins
Package
Code name
QFP100 (18 mm square, 0.65 mm pitch)
QFP100-P-1818B
Publication date: August 2014