MN103SFM9K Datasheet, PDF (13/25 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

Name
SB00
SB01
SB02
TQFP 48
Pin No.
57
54
51
I/O
Output
Other Function
P25
P22
P17
SBI0
59
SBI1
56
SBI2
53
Input P27
P24
P21
SBT0
58
SBT1
55
SBT2
52
I/O
P26
P23
P20
TM0IO
60
TM1IO
61
TM2IO
62
TM3IO
63
TM4IO
64
TM5IO
66
TM6IO
78
TM7IO
79
TM14IO
7
TM16IO
49
TM17IO
50
TM8AIO 68
TM8BIO 69
TM9AIO 72
TM9BIO 73
TM10AIO 76
TM10BIO 77
TM11IO0 95
TM11IO1 97
I/O
P30
P31
P32
P33
P34
P35
P50
P51
P84
P15
P16
I/O
P36
P37
P42
P43
P46
P47
P72
P73
TM9AO
70
TM9BO
71
TM10AO 74
TM10BO 75
Output P40
P41
P44
P45
TM11IO0 95
TM11IO1 97
TM11O2 99
TM11O3 100
TM11O4 1
TM11O5 2
Output P72
P73
P74
P75
P76
P76
P77
MN103SFM9K
32-bit Single-chip Microcontroller
PubNo. 232M9-010E
Function
Description
Serial interface
transmission out-
put pin
Serial interface
reception data
input pin
Serial interface
clock I/O pin
Timer I/O pin
Timer I/O pin
Timer output pin
PWM output pin
Transmission data output pins for serial
interface 0, 1, and 2.
Select output mode by the P1DIR and P2DIR
registers and serial pin function by the P1MD
and P2MD registers.
These can be used as normal I/O pins when
the serial interface is not used.
Reception data input pins for serial interface
0, 1, and 2.
Pull-up resistor can be selected by the
P2PLU register. Select input mode by the
P2DIR register.
These can be used as normal I/O pins when
the serial interface is not used.
Clock I/O pins for serial interface 0, 1, and 2.
Pull-up resistor can be selected by the
P2PLU register. Select I/O mode by the
P2DIR register and serial pin function by the
P2MD register.
These can be used as normal I/O pins when
the serial interface is not used.
Event counter input and timer pulse output
pin for 8-bit timer 0 to 7, and 14 to 17.
To use this pin as event counter input, select
input mode by the P1, 3, 5, and 8DIR regis-
ters. In input mode, pull-up resistor can be
selected by the P1, 3, 5, and 8PLU registers.
To use this pin as timer pulse output, select
timer output pin by the P1,3,5, and 8MD
registers and set to output mode by the
P1,3,5, and 8DIR registers.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
Event counter input, toggle output, and PWM
output pin for 16-bit timer 8 to 11.
To use this pin as event counter input, select
input mode by the P3, 4, and 7DIR registers.
In input mode, pull-up resistor can be
selected by the P3, 4, and 7PLU register.
To use this as timer output and PWM output,
select timer output pin by the P3, 4, and 7MD
registers, and set to output mode by the P3,
4, and 7DIR register.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
PWM output pin for 16-bit timer 9 and 10.
To use this pin as timer output and PWM out-
put, select timer output pin by the P4MD reg-
ister and set to output mode by the P4DIR
register.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
Motor control PWM signal output pin for 16-
bit timer 11. PWM signal for 16-bit timer 11 is
output to 6 pins simultaneously.
To use this pin as PWM output, select timer
output pin by the P7MD register and set to
output mode by the P7DIR register.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
Publication date: August 2014