MN103SFM9K Datasheet, PDF (14/25 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SFM9K
32-bit Single-chip Microcontroller
PubNo. 232M9-010E
Name
ADIN00
ADIN01
ADIN02
ADIN03
ADIN04
ADIN05
ADIN06
ADIN07
ADIN08
ADIN09
ADIN10
ADIN11
ADIN12
ADIN13
ADIN14
ADIN15
ADIN16
ADIN17
ADIN18
ADIN19
IRQ00
IRQ01
IRQ02
IRQ03
IRQ04
IRQ05
IRQ06
IRQ07
IRQ08
TQFP 48
Pin No.
11
12
13
14
16
18
19
20
21
22
23
24
25
26
27
28
29
30
34
35
3
4
5
6
43
44
45
46
47
I/O
Input
Input
Other Function
P90
P91
P92
P93
P94
P95
P96
P97
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PA7
PB0
PB1
PB2
PB3
P80
P81
P82
P83
P10/ EXTRG0
P11/ EXTRG1
P12
P13
P14
PWM00
80
PWM01
82
PWM02
84
PWM10
88
PWM11
90
PWM12
92
NPWM00 81
NPWM01 83
NPWM02 85
NPWM11 89
NPWM12 91
NPWM13 93
TEST1
31
TEST2
32
TEST3
33
TCPOUT 8
Output P52
P54
P56
P62
P64
P66
Output P53
P55
P57
P63
P65
P67
Input -
Function
Description
Analogue input pin Analogue input pins for an 20-channel, 10-bit
3 A/D converters.
These can be used as normal I/O pins when
these are not used as analog input.
External interrupt
pin
External interrupt input pins.
The valid edge can be selected. Set whether
both edges are detected or not by the edge
detection register (IRQEDGESEL). When it is
set not to detect both edges, select rising
edge, falling edge, H level, or L level by the
external interrupt condition specification reg-
ister (EXTMD0 and EXTMD1). When it is set
to detect both edges, select rising edge by
the external interrupt condition setting regis-
ter.
Motor control
PWM signal out-
put pin
Motor control 3-phase PWM signal output pin
Select PWM signal output pin by the P5MD
and P6MD registers and set to PWM output
by the PWMOFF register.
These can be used as normal I/O pins when
these is not used as PWM signal output pin.
Motor control
PWM signal
reverse output pin
Motor control 3-phase PWM signal revers
output pin.
Select PWM signal output pin by the P5MD
and P6MD registers and set to PWM output
by the PWMOFF register.
These can be used as normal I/O pins when
these is not used as PWM signal output pin.
Test signal input
Test signal input pin built-in pull-up resistor.
Pull-up with resistor of 1 kΩ or more.
Select a fixed to “L” for TCPOUT.
VPPEX is a power supply for flash EEPROM rewriting. Its potential should be the same as
VDD.
..
Publication date: August 2014