ERA-3YEB361V Datasheet, PDF (6/10 Pages) Panasonic Semiconductor – PRODUCT SPECIFICATION FOR APPROVAL

Subject
Metal Film(Thin Film) Chip Resistors PRODUCT SPECIFICATION FOR INFORMATION
Part No.
ERA3
Spec. No.
151-SRA-E102R
10－5
8. Environment Test
Item
High Temperature
Exposure
Rapid change of
temperatrure
Damp heat ,
Steady State
Load Life
Load Life in
Humidity
Specifications
Chip Resistor
± (0.5 % + 0.05Ω)
± (0.5 % + 0.05Ω)
± (0.5 % + 0.05Ω)
± (1.0 % + 0.1Ω)
± (1.0 % + 0.1Ω)
Explanation
Resistors shall be exposed at125±3°C
for
1000
±
48
0
hours.
− 55 ± 3 °C 30minutes
↓↑
Normal Within 3minutes 5 cycles
↓↑
125 ± 3 °C 30minutes
Resistors shall be exposed at 60±2°C
and 90~95% relative humidity in a humidity
test
chamber
for
1000
±
48
0
hours.
Resistors shall be exposed at 70±2°C and
1000
±
48
0
hours.
During
this
time.
The rated voltage shall be applied intermit-
tently for 1.5 hours ON,0.5 hours OFF.
Resistors shall be exposed to at 40±2°C and
90~95%
relative
humidity
for
1000
±
48
0
hours.
During this time the rated voltage shall be
applied intermittently for 1.5 hours ON,0.5
hours OFF.
9. Marking
Express resistance value on resin side with three digits.
(For example)
101
100Ω
The first two digits are
significant figures of resistance
and the third one denotes number
of zeros following.
E-96 series: No marking
Panasonic Electronic Devices Co., Ltd.