EFC4C002NL Datasheet, PDF (6/6 Pages) ON Semiconductor – Power MOSFET

PACKAGE DIMENSIONS
unit : mm
WLCSP8, 6.00x2.50 / EFCP6025-8EGJ-021
CASE 567MC
ISSUE O
D
PIN A1
REFERENCE
2X
0.05 C
2X
0.05 C
TOP VIEW
EFC4C002NL
AB
E
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
MILLIMETERS
DIM MIN MAX
A 0.19 0.23
b 0.22 0.28
b1 0.32 0.38
D 5.95 6.05
D1
0.305 BSC
D2
1.740 BSC
E 2.45 2.55
e
1.375 BSC
e1
1.25 BSC
L 1.97 2.03
SIDE VIEW
e
e
D1
1
2
D2
3
4
C
SEATING
PLANE
4X b
0.05 M C A B
e1/2
e1
4X b1
8
7
6
5
0.05 M C A B
4X L
0.05 M C A B
PACKAGE
OUTLINE
RECOMMENDED
SOLDERING FOOTPRINT*
1.375 1.375
1.74
4X
0.25
1 : Source1
2 : Gate1
3 : Source1
4 : Drain
5 : Drain
6 : Source2
7 : Gate2
8 : Source2
BOTTOM VIEW
1.25
4X
0.35
1
4X
2.00
DIMENSIONS: MILLIMETERS
ORDERING INFORMATION
Device
EFC4C002NLTDG
Marking
4C2
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Package
WLCSP8, 6.00  2.50
EFCP6025-8EGJ-021
(Pb-Free / Halogen Free)
Shipping (Qty / Packing)
5,000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
Note on usage : Since the EFC4C002NL is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects. Please contact sales for use except the designated application.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
6