AR0230 Datasheet, PDF (6/36 Pages) ON Semiconductor – Full HD Digital Image Sensor

AR0230CS: 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor
General Description
General Description
The ON Semiconductor AR0230CS can be operated in its default mode or programmed
for frame size, exposure, gain, and other parameters. The default mode output is a
1080p-resolution image at 60 frames per second (fps) through the HiSPi port. In linear
mode, it outputs 12-bit or 10-bit A-Law compressed raw data, using either the parallel or
serial (HiSPi) output ports. In high dynamic range mode, it outputs 12-bit compressed
data using parallel output. In HiSPi mode, 12- or 14-bit compressed, or 16-bit linearized
data may be output. The device may be operated in video (master) mode or in single
frame trigger mode.
FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a
synchronized pixel clock in parallel mode.
The AR0230CS includes additional features to allow application-specific tuning:
windowing and offset, auto black level correction, and on-board temperature sensor.
Optional register information and histogram statistic information can be embedded in
the first and last 2 lines of the image frame.
The AR0230CS is designed to operate over a wide temperature range of -30°C to +85°C
ambient.
AR0230CS/D Rev. 8, Pub. 11/15 EN
6
©Semiconductor Components Industries, LLC, 2015.