MC10E116_16 Datasheet, PDF (5/8 Pages) ON Semiconductor – 5V ECL Quint Differential Line Receiver

MC10E116, MC100E116
Table 6. 100E SERIES NECL DC CHARACTERISTICS (V_CCx = 0.0 V; V_EE = −5.0 V (Note 1))
−40°C
0°C
25°C
85°C
Symbol
Characteristic
Min Typ
Max
Min
Typ
Max
Min
Typ
Max Min
Typ
Max Unit
I_EE
Power Supply
Current
29
35
29
35
29
35
29
40 mA
V_OH
Output HIGH Voltage
(Note 2)
−1025 −950 −880 −1025 −950 −880 −1025 −950 −880 mV
V_OL
Output LOW Voltage
(Note 2)
−1810 −1705 −1620 −1810 −1745 −1620 −1810 −1740 −1620 mV
V_IH
Input HIGH Voltage
(Single-Ended)
−1025
−1165 −1025 −880 −1165 −1025 −880 −1165 −1025 −880 mV
V_IL
Input LOW Voltage
(Single-Ended)
−1645
−1810 −1645 −1475 −1810 −1645 −1475 −1810 −1645 −1475 mV
V_BB
Output Voltage
Reference
−1.38
−1.26 −1.38
−1.25 −1.38
−1.26 −1.38
−1.26 V
V_IHCMR
Input HIGH Voltage
Common Mode
Range (Differential
Configuration)
(Note 3)
−2.8
−0.6 −2.8
−0.6 −2.8
−0.6 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
200
200
200
200 mA
0.5
0.3
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with V_CC. V_EE can vary −0.46 V / +0.8 V.
2. Outputs are terminated through a 50 W resistor to V_CC − 2.0 V.
3. V_IHCMR min varies 1:1 with V_EE, max varies 1:1 with V_CC.
www.onsemi.com
5