MC10E116_16 Datasheet, PDF (4/8 Pages) ON Semiconductor – 5V ECL Quint Differential Line Receiver

MC10E116, MC100E116
Table 5. 100E SERIES PECL DC CHARACTERISTICS (V_CCx = 5.0 V, V_EE = 0.0 V (Note 1))
−40°C
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Min Typ Max Unit
I_EE Power Supply Current
I_EE Power Supply Current
V_OH Output HIGH Voltage
(Note 2)
29 35
29 35
29 35
29 35 mA
29 35
29 35
29 35
29 40 mA
3975 4050 4120 3975 4050 4120 3975 4050 4120 mV
V_OL Output LOW Voltage
(Note 2)
3190 3295 3380 3190 3255 3380 3190 3260 3380 mV
V_IH Input HIGH Voltage
(Single-Ended)
3975
3835 3975 4120 3835 3975 4120 3835 3975 4120 mV
V_IL Input LOW Voltage
(Single-Ended)
3355
3190 3355 3525 3190 3355 3525 3190 3355 3525 mV
V_BB Output Voltage Reference 3.62
V_IHCMR
Input HIGH Voltage Com-
mon Mode Range
(Differential Configuration)
(Note 3)
3.74 3.64
2.2
3.75 3.62
4.4 2.2
3.74 3.62
4.4 2.2
3.74 V
4.4 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
200
200
200
200 mA
0.5 0.3
0.5 0.25
0.5 0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with V_CC. V_EE can vary −0.46 V / +0.8 V.
2. Outputs are terminated through a 50 W resistor to V_CC − 2.0 V.
3. V_IHCMR min varies 1:1 with V_EE, max varies 1:1 with V_CC.
www.onsemi.com
4