CM2009 Datasheet, PDF (3/6 Pages) California Micro Devices Corp – VGA Port Companion Circuit

CM2009
Table 1. PIN DESCRIPTIONS
Lead(s)
Name
Description
11
DDC_IN2
DDC signal input. Connects to the VGA controller side of one of the sync lines.
12
DDC_OUT2 DDC signal output. Connects to the video connector side of one of the sync lines.
13
SYNC_IN1
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
14
SYNC_OUT1 Sync signal buffer output. Connects to the video connector side of one of the sync lines.
15
SYNC_IN2
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
16
SYNC_OUT2 Sync signal buffer output. Connects to the video connector side of one of the sync lines.
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
V_{CC_VIDEO,} V_{CC_DDC} and V_{CC_SYNC} Supply Voltage Inputs
ESD Diode Forward Current (one diode conducting at a time)
[GND − 0.5] to +6.0
V
10
mA
DC Voltage at Inputs
VIDEO_1, VIDEO_2, VIDEO_3
DDC_IN1, DDC_IN2
DDC_OUT1, DDC_OUT2
SYNC_IN1, SYNC_IN2
Operating Temperature Range
V
[GND − 0.5] to [V_{CC_VIDEO} + 0.5]
[GND − 0.5] to 6.0
[GND − 0.5] to 6.0
[GND − 0.5] to [V_{CC_SYNC} + 0.5]
−40 to +85
°C
Storage Temperature Range
−40 to +150
°C
Package Power Rating (T_A = 25°C)
500
mW
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
3