English
Language : 

CAT25128LI-G Datasheet, PDF (3/20 Pages) ON Semiconductor – 128-Kb SPI Serial CMOS EEPROM
◁
CAT25128
Table 4. D.C. OPERATING CHARACTERISTICS − NEW PRODUCT (Rev E)
(VCC = 1.8 V to 5.5 V, TA = −40°C to +85°C and VCC = 2.5 V to 5.5 V, TA = −40°C to +125°C, unless otherwise specified.)
Symbol
Parameter
Test Conditions
Min
Max
ICCR
Supply Current
Read, SO open /
VCC = 1.8 V, fSCK = 5 MHz
0.8
(Read Mode)
−40°C to +85°C
VCC = 2.5 V, fSCK =10 MHz
1.2
VCC = 5.5 V, fSCK = 20 MHz
3.0
Read, SO open /
2.5 V< VCC < 5.5 V,
2.0
−40°C to +125°C
fSCK = 10 MHz
ICCW
Supply Current
Write, CS = VCC/
VCC = 1.8 V
1.5
(Write Mode)
−40°C to +85°C
VCC = 2.5 V
2
VCC = 5.5 V
2
Write, CS = VCC/
2.5 V< VCC < 5.5 V
2
−40°C to +125°C
ISB1
ISB2
IL
ILO
VIL1
VIH1
VIL2
VIH2
VOL1
VOH1
VOL2
VOH2
Standby Current
Standby Current
Input Leakage Current
Output Leakage
Current
Input Low Voltage
Input High Voltage
Input Low Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
Output Low Voltage
Output High Voltage
VIN = GND or VCC,
CS = VCC, WP = VCC,
VCC = 5.5 V
TA = −40°C to +85°C
TA = −40°C to +125°C
VIN = GND or VCC,
CS = VCC, WP = GND,
VCC = 5.5 V
TA = −40°C to +85°C
TA = −40°C to +125°C
VIN = GND or VCC
CS = VCC
VOUT = GND or VCC
TA = −40°C to +85°C
TA = −40°C to +125°C
VCC ≥ 2.5 V
VCC ≥ 2.5 V
VCC < 2.5 V
VCC < 2.5 V
VCC ≥ 2.5 V, IOL = 3.0 mA
VCC ≥ 2.5 V, IOH = −1.6 mA
VCC < 2.5 V, IOL = 150 mA
VCC < 2.5 V, IOH = −100 mA
−2
−1
−1
−0.5
0.7 VCC
−0.5
0.75 VCC
VCC − 0.8 V
VCC − 0.2 V
1
3
3
5
2
1
2
0.3 VCC
VCC + 0.5
0.25 VCC
VCC + 0.5
0.4
0.2
Units
mA
mA
mA
mA
mA
mA
V
V
V
V
V
V
V
V
Table 5. PIN CAPACITANCE (Note 5) (TA = 25°C, f = 1.0 MHz, VCC = +5.0 V)
Symbol
Test
Conditions
Min
Typ
Max
Units
COUT
Output Capacitance (SO)
VOUT = 0 V
8
pF
CIN
Input Capacitance (CS, SCK, SI, WP, HOLD)
VIN = 0 V
8
pF
5. These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AEC−Q100
and JEDEC test methods.
http://onsemi.com
3
 ▷