LC88F5LA4ACS Datasheet, PDF (27/33 Pages) Sanyo Semicon Device – FROM 96K byte, RAM 6K byte on-chip 16-bit 1-chip Microcontroller

LC88F5LA4ACS
Consumption Current Characteristics at Ta=-40 to +85°C, VSS1=VSS2=VSSA=0V
typ: 3.0V
Parameter
Symbol
Applicable
Pin/Remarks
Conditions
Specification
VDD[V]
min
typ
max unit
Normal mode
consumption
current
(Note 7-1)
IDDOP(1)
VDD1
=VDD2
=VDDA
≥VDD3
• FmCF=10MHz ceramic oscillation mode
• FmMRC=0MHz (oscillation stoped)
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 10MHz
• Internal RC oscillation stopped
2.6 to 3.6
3.89
7.2
• 1/1 frequency division mode
IDDOP(2)
• FmCF=0Hz (oscillation stopped)
• FmMRC=10MHz oscillator mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 10MHz
2.6 to 3.6
3.72
6.6
• Internal RC oscillation stopped
• 1/1 frequency division mode
mA
IDDOP(3)
• FmCF=0Hz (oscillation stopped)
• FmMRC=4MHz oscillator mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 4MHz
2.2 to 3.6
2.28
3.2
• Internal RC oscillation stopped
• 1/1 frequency division mode
IDDOP(4)
• FmCF=0Hz (oscillation stopped)
• FmMRC=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
2.2 to 3.6
0.62
1.8
• System clock set to internal RC oscillation
• 1/1 frequency division mode
IDDOP(5)
• FmCF=0Hz (oscillation stopped)
• FmMRC=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 32.768kHz
2.2 to 3.6
24.4
65 μA
• Internal RC oscillation stopped
• 1/1 frequency division mode
Note 7-1: The consumption current value includes none of the currents that flow into the output transistor and internal
pull-up resistors.
Continued on next page.
No.A1860-27/33