|
NCN8026A_16 Datasheet, PDF (1/15 Pages) ON Semiconductor – Compact Low Power Smart Card Interface IC | |||
|
NCN8026A
Compact Low Power Smart
Card Interface IC
The NCN8026A is a compact and costâeffective single SIM &
smart card interface IC. It can be used with 1.8 V, 3 V and 5 V IC
cards. The card VCC supply is provided by a builtâin very low drop
out and low noise Regulator. The NCN8026A offers enhanced
www.onsemi.com
performances with low VCC output ripple under loadâtransient
conditions, very low shutdown current and 1.8 Vâtoâ5 V logic
MARKING
compatibility.
DIAGRAMS
This device is fully compatible with the ISO 7816â3, EMV 4.2,
UICC and related standards including NDS and other STB standards
(Nagravision, Irdeto, Conax ..). It satisfies the requirements specifying
conditional access into SetâTopâBoxes (STB) or Conditional Access
QFN24
MN SUFFIX
CASE 485L
NCN
8026A
ALYWG
G
Modules (CAM).
This smart card interface IC is available in a QFNâ24 package
A = Assembly Location
providing all the industryâstandard features usually required for STB
smart card interface.
L = Wafer Lot
Y = Year
W = Work Week
Features
⢠Single IC Card Interface
G = PbâFree Package
(Note: Microdot may be in either location)
⢠Fully Compatible with ISO 7816â3, EMV4.2, UICC and Related
Standards Including NDS and Other STB Standards (Nagravision,
Irdeto, Conax...)
⢠Three Bidirectional Buffered I/O Level Shifters (C4, C7 and C8)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
⢠1.8 V, 3.0 V or 5.0 V $ 5 % Regulated Card Power Supply Such as
ICC ⤠70 mA with Low VCC Ripple
⢠Regulator Power Supply: VDDP = 2.7 V to 5.5 V (@ 1.8 V),
3.0 V to 5.5 V (@ 3.0 V) and 4.85 V to 5.5 V (@ 5.0 V)
⢠Independent Power Supply range on Controller
⢠Interrupt Signal INT for Card Presence and Faults
Interface such as VDD = 1.6 V to 5.5 V
⢠Handles Class A, B and C Smart Cards
⢠Short Circuit Protection on all Card Pins
⢠Support up to 27 MHz input Clock with Internal
⢠Chip Select Pin (CS) for Dual Card Operating
⢠External UnderâVoltage Lockout Threshold
Adjustment on VDD (PORADJ Pin)
⢠Available in One Package Formats: QFNâ24
Division Ratio 1/1, 1/2, 1/4 and 1/8 through CLKDIV1
and CLKDIV2
⢠HBM ESD Protection on Card Pins up to +8 kV
(Human Body Model)
⢠Activation / Deactivation Sequences (ISO7816
Sequencer)
⢠Fault Protection Mechanisms Enabling Automatic
Device Deactivation in Case of Overload, Overheating,
⢠These are PbâFree Devices
Typical Application
⢠Pay TV, Set Top Box Decoder with Conditional Access
and PayâperâView
⢠Conditional Access Module (CAM / CAS)
⢠SIM card interface applications (UICC / USIM)
⢠Point Of Sales and Transaction Terminals
Card Takeâoff or Power Supply Dropâout (OCP, OTP,
⢠Electronic Payment and Identification
UVP)
© Semiconductor Components Industries, LLC, 2016
1
May, 2016 â Rev. 7
Publication Order Number:
NCN8026A/D
|
▷ |