E3X-N Datasheet, PDF (9/52 Pages) Omron Electronics LLC – Teaching Optical Fiber Photoelectric Sensor

E3X-N
E3X-N
Reflective Sensors
Model
E32-D11L
E32-D12
E32-D21L
E32-D22L
E32-DC200
E32-DC200B
E32-DC200B4
Differential
travel
20% of max.
of sensing
distance
Ambient temperature
Operating: –40°C to
70°C (with no icing)
Ambient
humidity
Operating:
35% to 85%
Permissible bending
radius
Material
25 mm min.
Black
polyethylene
Degree of
protection
IEC60529
IP67
E32-DC200E
E32-DC200F
E32-DC200F4
E32-D11
E32-D21
E32-DC9G
E32-DC9G4
4 mm min.
Vinyl chloride
E32-D33
E32-CC200
E32-D32
E32-D32L
E32-D14L
E32-D24
E32-D12F
Operating: –30°C to
70°C (with no icing)
40 mm min.
Teflon-covered
black
polyethylene*¹
E32-D51
E32-D61
E32-D73
E32-R21 with
E39-R3
E32-R16 with
E39-R1
E32-L25*⁴
E32-L25A*⁴
E32-L25L*⁴
E32-L24L*⁴
5% of max. of
sensing
distance
Operating: –40°C to
150°C (with no icing)*²
Operating: –40°C to
300°C (with no icing)*³
Operating: –40°C to
400°C (with no icing)*³
Operating: –40°C to
70°C (with no icing)
Operating: –25°C to
55°C (with no icing)
Operating: –40°C to
70°C (with no icing)
Operating: –40°C to
105°C*⁵
35 mm min.
25 mm min.
Fluoride resin
SUS
Black
polyethylene
10 mm min. (average Reinforced
at 10% decrease of polyethylene
sensing distance)
IEC60529
IP66
IEC60529
IP50
Note: The Sensor may be set to the light-ON state if the sensitivity (teaching) is set to maximum, in which case, use the Sensor at a sensitivity
setting other than the maximum level.
*¹ Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
*² When used continuously between –40°C and 130°C.
*³ The resistive temperature varies with the part of the Fiber Unit. For details, refer to Dimensions.
*⁴ Beam size: 2-mm dia.
*⁵ For continuous operation, use the products within the temperature ranging from –40_C to 90_C.
Fine Through-beam Sensors
Model Beam size
E32-T22S 13 mm dia.
(at a distance
E32-T24S ^{of 200 mm)}
Differenci
al travel
---
Horizontal
positioning
accuracy
---
Ambient
temperature
Operating:
–40°C to 70°C
(with no icing)
Ambient
humidity
Operating:
35% to 85%
Permissible
bending
radius
Material
10 mm min.*
Reinforced
laminated
vinyl
chloride
Degree of
protection
IEC60529
IP67
E32-T84S
Operating:
–40°C to 200°C
(with no icing)
25 mm min. SUS
9