E3X-N Datasheet, PDF (37/52 Pages) Omron Electronics LLC – Teaching Optical Fiber Photoelectric Sensor

E3X-N
E32-M21
Sensing head
M3 x 0.35
(SUS303)
Two hexagon clamping nuts
Two toothed washers
Silicone tube (see note) _{Plastic fibers, four, 1 dia.}
E3X-N
Note: One set of silicone tubes is black while the other
set is grey for easy identification when they are
connected to the emitter and receiver.
Sleeve
13
28
E32-T51
E32-T54
2 dia.
1.8
11
23
2,000
1.5 dia.
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.7 (nickel-plated brass)
7 ^{2.85 dia. 2.4}
1
15
17
Optical fiber, 2.2 dia.
2,000
Note: Resistant temperature is 150°C.
Resistant temperature is 130°C
when used continuously.
Sensing surface
3 dia.
Sensing head (stainless)
Note: Resistant temperature is 150°C.
Resistant temperature is 130°C
when used continuously.
Optical fiber, 2.2 dia.
E32-T61
1.0 dia. _{M2.6 x 0.45}
Two hexagon clamping nuts
Two toothed washers ^{SUS flexible tube} Hexagon clamping screw
Sensing head M4 x 0.7
(SUS303)
2.8 dia.
4 dia. 5 dia. Sleeve
7
3
2.4 ^{4 dia.}
20
10
2,000
5
A
(See note*)
13
28
B
Note: Section A resists 300°C and section B (which is inserted to the Amplifier) resists 110°C.
The operating temperature of the section to be inserted into the Sensor (marked with *)
must be within the operating temperature range of the Amplifier.
6