E3X-N Datasheet, PDF (30/52 Pages) Omron Electronics LLC – Teaching Optical Fiber Photoelectric Sensor

E3X-N
Stainless Steel Tube with a 90° Bend at the Base
Length
ȏ₂
R
E3X-N
Bending radius
R 5.0
5.0 mm
ȏ₁ (±1)
10.0 mm
R 7.5
7.5 mm
17.5 mm
R 10.0
10.0 mm
20.0 mm
R 12.5
12.5 mm
22.5 mm
The length overall is 120 mm max.
Note: If larger ȏ₂ is required, use the E39-F11 Sleeve Bender.
Sensing Distance for Tubes with 90° Bends
Model
E32-TC200B
E32-TC200F
E32-DC200F
Amplifier
E3X-NT
E3X-NM
E3X-NT
E3X-NM
E3X-NT
E3X-NM
Standard
290 mm
270 mm
70 mm
65 mm
22 mm
20 mm
Bending radius
R5.0
R7.5
R10.0
180 mm 235 mm 255 mm
170 mm 220 mm 240 mm
32 mm 70 mm 70 mm
30 mm 65 mm 65 mm
16 mm 22 mm 22 mm
15 mm 20 mm 20 mm
R12.5
290 mm
270 mm
70 mm
65 mm
22 mm
20 mm
Fiber Unit with Longer Fiber
Applicable Models
E32-TC200/-DC200
E32-TC200B/-DC200B
E32-TC200E/-DC200E
E32-TC200F/-DC200F
E32-TC200A
Fiber Length vs. Sensing Distance
Through-beam Fiber Unit
(Based on the sensing distance using a fiber length
of 2 m as 100%)
Appearance
ȏ
The length can be ordered in increments of 1 m between
6 m min. and 20 m max. (2 m and 5 m fiber length types are
standard for E32-TC200, E32-DC200.)
Reflective Fiber Unit
(Based on the sensing distance using a fiber length
of 2 m as 100%)
Fiber length (m)
Fiber length (m)
30