E3X-MDA11 Datasheet, PDF (7/14 Pages) Omron Electronics LLC – OMRONs Next-generation Platform for a Wide Range of Detection

E3X-DA-S/MDA
Advanced models
Type
2-channe models
External input models Twin-output models ATC function models Analog output models
Item
Model E3X-DA@RM-S
E3X-DA@TW-S
E3X-DA@AT-S
E3X-DA@AN-S
E3X-MDA@
Digital display
Select from incident
level + threshold or Select from incident level + threshold or other 6 patterns
other 7 patterns
Select from incident
level for channel 1 +
incident level for
channel 2 or other 7
patterns
Display orientation
Switching between normal/reversed display is possible.
Ambient illumination
(Receiver side)
Incandescent lamp: 10,000 lux max.
Sunlight:
20,000 lux max.
Operating: Groups of 1 to 2 Amplifiers: 25“C to 55“C
Ambient temperature range
Groups of 3 to 10 Amplifiers: 25“C to 50“C
Groups of 11 to 16 Amplifiers: 25“C to 45“C
Storage: 30“C to 70“C (with no icing or condensation)
Ambient humidity range
Operating and storage: 35% to 85% (with no condensation)
Insulation resistance
20 M: min. (at 500 VDC)
Dielectric strength
1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance
Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s², for 3 times each in X, Y and Z directions
Degree of protection
IEC 60529 IP50 (with Protective Cover attached)
Connection method
Pre-wired or amplifier unit connector
Weight (packed state)
Pre-wired model: Approx. 100 g, Amplifier unit connector model: Approx. 55 g
Case
Materials
Cover
Polybutylene terephthalate (PBT)
Polycarbonate (PC)
Accessories
Instruction manual
Amplifier Unit Connectors
Item
Model
E3X-CN11/21/22
E3X-CN12
Rated current
2.5 A
Rated voltage
Contact resistance
50 V
20 m: max. (20 mVDC max., 100 mA max.)
(The figure is for connection to the Amplifier Unit and the adjacent Connec-
tor. It does not include the conductor resistance of the cable.)
No. of insertions
Destruction: 50 times
(The figure for the number of insertions is for connection to the Amplifier Unit
and the adjacent Connector.)
Mate- ^Housing
rials _Contacts
Polybutylene terephthalate (PBT)
Phosphor bronze/gold-plated nickel
Weight
(packed state)
Approx. 55 g
Approx. 25 g
Mobile Console
Item Model
E3X-MC11-SV2
Applicable
Sensors
E3X-DA-S
E3X-MDA
E3C-LDA
E2C-EDA
Power supply
voltage
Charged with AC adapter
Connection
method
Connected via adapter
Weight
Approx. 580 g (Console
(packed state) only: 120 g)
Refer to Instruction Manual provided with
the Mobile Console for details.
7