E3T-FD11M Datasheet, PDF (7/24 Pages) Omron Electronics LLC – The Improved E3T Series with Easier, Smoother Mounting and Installation

E3T
Sensing method
Appearance
Diffuse-reflective
Convergent-reflective
Rectangular type (Flat)
Cylindrical type (Top-view) Rectangular type (Side-view)
BGS-reflective
Rectangular type (Flat)
Item
NPN
output
Light-ON
Dark-ON
PNP
output
Light-ON
Dark-ON
Sensing distance
Standard sensing object
Minimum detectable
object (typical)
Hysteresis (white paper)
Black/white error
Directional angle
Light source
(wavelength)
Power supply voltage
Current consumption
Control output
Protection circuits
Response time
Ambient illumination
Ambient temperature
range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
(destruction)
Shock resistance
(destruction)
Degree of protection
Connection method
Weight (packed state)
Case
Materi-
als
Display window
Lens
Hexagonal nuts
Toothed wash-
ers
Accessories ^*
E3T-FD11
E3T-FD11M
E3T-FD12
E3T-FD12M
E3T-FD13
E3T-FD13M
E3T-FD14
E3T-FD14M
E3T-CD11
---
E3T-CD13
---
5 to 30 mm
(50 × 50 mm white paper)
3 to 50 mm
(100 × 100 mm white paper)
---
0.15-mm dia.
(sensing distance 10 mm)
6 mm max.
---
---
---
15% or less of the sensing
distance
Red LED (650 nm)
Infrared LED (870 nm)
12 to 24 VDC ±10%, ripple (p-p) 10% max.
20 mA max.
Load power supply voltage: 26.4
VDC max.
Load current: 50 mA max. (re-
sidual voltage: 2 V max. for load
current of 10 to 50 mA, 1 V max.
for load current of less than 10
mA)
Open-collector output
Load power supply voltage: 30
VDC max.
Load current: 80 mA max.
(residual voltage: 1 V max.)
Open-collector output
Power supply and control output
reverse polarity protection,
Output short-circuit protection,
Mutual interference prevention
Power supply reverse polarity
protection,
Output short-circuit protection
Operate or reset: 1 ms max.
Operate or reset: 0.5 ms max.
Incandescent lamp: 5,000 lx
Incandescent lamp: 3,000 lx
max., Sunlight: 10,000 lx max. max.
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: −25 to +55°C
Storage: −30 to +70°C
(with no icing or condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
Operating or Storage: 35% to
+85% (with no condensation)
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min. 500 VAC, 50/60 Hz for 1 min.
10 to 2,000 Hz,
1.5-mm double amplitude or
300 m/s² for 0.5 hours each in X,
Y, and Z directions
10 to 55Hz, 1.5-mm double am-
plitude for 2 hours each in X, Y,
and Z directions
1,000 m/s² 3 times each in X, Y, 500 m/s² 3 times each in X, Y,
and Z directions
and Z directions
IP67 (IEC 60529)
IP65 (IEC 60529)
Pre-wired (standard length: 2 m)
Approx. 20 g
Approx. 40 g
PBT (polybutylene terephtha-
late)
SUS303
Denatured polyarylate
Epoxy
Denatured polyarylate
Polysulfone
---
SUS303
---
SUS303
Instruction manual, Phillips
screws(M2 × 8), Nuts, Spring
washers, Flat washers ^*
Instruction manual, Hexagonal
nuts, Toothed washers, Adjust-
ment driver
E3T-SL11
E3T-SL11M
E3T-SL12
E3T-SL12M
E3T-SL13
E3T-SL13M
E3T-SL14
E3T-SL14M
5 to 15 mm
(50 × 50 mm
white paper)
E3T-SL21
E3T-SL21M
E3T-SL22
E3T-SL22M
E3T-SL23
E3T-SL23M
E3T-SL24
E3T-SL24M
5 to 30 mm
(50 × 50 mm
white paper)
E3T-FL11
E3T-FL12
E3T-FL13
E3T-FL14
1 to 15 mm
(50 × 50 mm
white paper)
E3T-FL21
E3T-FL22
E3T-FL23
E3T-FL24
1 to 30 mm
(50 × 50 mm
white paper)
0.15-mm dia.
(sensing distance 10 mm)
2 mm max.
6 mm max.
0.15-mm dia. non-glossy object
(sensing distance 10 mm)
0.5 mm max. 2 mm max.
15% max.
Red LED (650 nm)
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load cur-
rent of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Power supply and control output reverse polarity protection,
Output short-circuit protection,
Mutual interference prevention
Operate or reset: 1 ms max.
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
1,000 VAC, 50/60 Hz for 1 min.
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s² for 0.5 hours
each in X, Y, and Z directions
1,000m/s² 3 times each in X, Y, and Z directions
IP67 (IEC 60529)
Approx. 20 g
PBT (polybutylene terephthalate)
Denatured polyarylate
Denatured polyarylate
---
---
Instruction manual, Phillips
screws(M2 × 14), Nuts, Spring
washers, Flat washers ^*
Instruction manual, Phillips
screws(M2 × 8), Nuts, Spring
washers, Flat washers
*Only the Instruction Manual is included with an M3-mounting Sensor (E3T-FD@@M or E3T-SL@@M). Order the Set of Mounting Screws separately if required.
7