E3T-FD11M Datasheet, PDF (6/24 Pages) Omron Electronics LLC – The Improved E3T Series with Easier, Smoother Mounting and Installation

E3T
Ratings and Specifications
Sensing method
Appearance
Rectangular type (Side-view)
Through-beam
Rectangular type (Flat)
Cylindrical
type
(Top-view)
Cylindrical
type
(Side-view)
Retro-reflective (without M.S.R. function)
Rectangular type
(Side-view)
Item
NPN
output
Light-ON
Dark-ON
PNP
output
Light-ON
Dark-ON
Sensing distance
Standard sensing object
Minimum detectable object
(typical)
Hysteresis (white paper)
Black/white error
Directional angle
Light source (wavelength)
Power supply voltage
Current consumption
Control output
Protection circuits
Response time
Ambient illumination
Ambient temperature
range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
(destruction)
Shock resistance
(destruction)
Degree of protection
Connection method
Weight (packed state)
Case
Display window
Materi- Lens
als
Hexagonal nuts
Toothed wash-
ers
Accessories ^*2
E3T-ST31
E3T-ST32
E3T-ST33
E3T-ST34
E3T-ST11
E3T-ST11M
E3T-ST21
E3T-ST21M
E3T-FT11
E3T-ST12
E3T-ST12M
E3T-ST22
E3T-ST22M
E3T-FT12
E3T-ST13
E3T-ST13M
E3T-ST23
E3T-ST23M
E3T-FT13
E3T-ST14
E3T-ST14M
E3T-ST24
E3T-ST24M
E3T-FT14
E3T-FT21
E3T-FT22
E3T-FT23
E3T-FT24
2m
1m
300 mm
500 mm
300 mm
Opaque, 3-
mm dia.
Opaque, 2-mm dia. min.
min.
Opaque, 3-
mm dia.
Opaque, 2-mm dia.
---
---
Emitter: 2 to 20°
Receiver: 2 to 70°
Opaque, 1.3-mm dia. min.
Opaque, 1.3-mm dia.
Emitter: 3 to 25°
Receiver: 3° min.
Red LED (650 nm)
12 to 24 VDC ±10%, ripple (p-p) 10% max.
30 mA max. (Emitter 10 mA max., Receiver 20 mA max.)
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of
10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Power supply and control output reverse polarity protection,
Output short-circuit protection
Operate or reset: 1 ms max.
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
20 MΩ min. at 500 VDC
AC1,000V, 50/60 Hz for 1 min.
10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s² for 0.5 hours each
in X, Y, and Z directions
1,000 m/s² 3 times each in X, Y, and Z directions
IP67 (IEC 60529)
Pre-wired (standard length: 2 m)
Approx. 40 g
PBT (polybutylene terephthalate)
Denatured polyarylate
Denatured polyarylate
---
---
Instruction manual, Phillips screws (Side-view Sensors: M2 × 14, Flat
Sensors: M2 × 8), Nuts, Spring washers, Flat washers ^*2
---
E3T-CT12
---
E3T-CT14
---
E3T-CT22S
---
E3T-CT24S
1m
500 mm
Opaque, 4- Opaque, 5-
mm dia. min. mm dia. min.
---
Receiver: 2°
Red LED
(630 nm)
Receiver: 10°
Red LED
(625 nm)
30 mA max. (Emitter 15 mA
max., Receiver 15 mA max.)
Load power supply voltage:
30 VDC max.
Load current: 80 mA max.
(residual voltage: 1 V max.)
Open-collector output
Power supply reverse polarity
protection,
Output short-circuit protection
Operate or reset: 0.5 ms max.
Incandescent lamp: 3,000 lx
max.
Operating: −25 to +55°C
Storage: −30 to +70°C
(with no icing or condensa-
tion)
Operating or Storage: 35% to
+85% (with no condensation)
AC500V, 50/60 Hz for 1 min.
10 to 55Hz, 1.5-mm double
amplitude for 2 hours each in
X, Y, and Z directions
500 m/s² 3 times each in X, Y,
and Z directions
IP65 (IEC 60529)
Approx. 60 g
SUS303
Polysulfone
Polysulfone
SUS303
SUS303
Instruction manual, Hexago-
nal nuts, Toothed washers
E3T-SR41
E3T-SR42
E3T-SR43
E3T-SR44
200 mm [30 mm] ^*1 (Using the E39-R4)
100 mm [10 mm] ^*1 (Using the E39-R37-
CA)
Opaque, 27-mm dia. min.
2-mm dia. (Sensing distance 100 mm)
2 to 20°
Red LED (650 nm)
20 mA max.
Load power supply voltage: 26.4 VDC
max.
Load current: 50 mA max. (residual volt-
age: 2 V max. for load current of 10 to 50
mA, 1 V max. for load current of less
than 10 mA)
Open-collector output
Power supply and control output reverse
polarity protection, Output short-circuit
protection,
Mutual interference prevention
Operate or reset: 1 ms max.
Incandescent lamp: 5,000 lx max., Sun-
light: 10,000 lx max.
Operating: −25 to +55°C
Storage: −40 to +70°C
(with no icing or condensation)
Operating: 35% to +85%
Storage: 35% to +95%
(with no condensation)
AC1,000V, 50/60 Hz for 1 min.
10 to 2,000 Hz, 1.5-mm double ampli-
tude or 300 m/s² for 0.5 hours each in X,
Y, and Z directions
1,000m/s² 3 times each in X, Y, and Z di-
rections
IP67 (IEC 60529)
Approx. 20 g
PBT (polybutylene terephthalate)
Denatured polyarylate
Methacrylc resin
---
---
Instruction manual, Phillips screws
(M2×14),
Nuts, Spring washers, Flat washers,
E39-R4 (E3T-SR4@ only),
E39-R37-CA (E3T-SR4@-S only)
*1.Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. Only the Instruction Manual is included with an M3-mounting Sensor (E3T-ST@@M). Order the Set of Mounting Screws separately if required.
6