E3T-FD11M Datasheet, PDF (14/24 Pages) Omron Electronics LLC – The Improved E3T Series with Easier, Smoother Mounting and Installation

E3T
Dimensions
Sensors
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
M2-mounting Sensors
Through-beam Side-view Sensors
E3T-ST1@ (Emitter)
E3T-ST2@ (Emitter)
7
9.5
E3T-ST3@ (Emitter)
7.7
Mounting Holes
Emitter
lens
(1.3 dia.)
3.8
2.7
9
14.6
Two, M2 holes
9±0.2
Two, 2.2 dia. * _3.9
Emitter: E3T-ST@@-L
Receiver: E3T-ST@@-D
E3T-ST1@ (Receiver)
E3T-ST2@ (Receiver)
2.2
4.8
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
*The mounting holes are made of SUS301.
M12 Smartclick Pre-wired Connector Model
(E3T-ST@@-M1TJ/E3T-FT@@-M1TJ)
2
1
E3T-ST3@ (Receiver)
Operation
7
indicator
*_{The receiver lens diameters}
are given below.
Model
Receiver lens
diameter
E3T-ST1@-D
E3T-ST2@-D
(1.3 dia.)
E3T-ST3@-D
(2.4 dia.)
Receiver
lens ^*
Through-beam Flat Sensors
Stability
indicator
2.2
9.5
7.7
3.8
2.7
9
14.6
Mounting Holes
Two, M2 holes
9±0.2
3
4
M12
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
Two, 2.2 dia. * 3.9
e-CON Pre-wired Connector Model
(E3T-ST@@-ECON/E3T-FT@@-ECON)
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
4.8
Insulator diameter: 0.7 mm),
Standard length: 2 m
*The mounting holes are made of SUS301.
5.9
1
2
3
15
4
15.6
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard lengths: 0.3 m and 2 m
E3T-FT1@ (Emitter)
E3T-FT2@ (Emitter)
12
Emitter
lens
(1.3 dia.)
8.6 ^{14 15.8}
3.5
Mounting Holes
Two, M2 holes
Termi-
nal No.
1
2
3
Specifica-
tions
+V
---
0V
Two, 2.2 dia. *
8±0.2
3.2
4
Output
(receiver only)
Emitter: E3T-FT@@-L
Receiver: E3T-FT@@-D
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
4.4
Insulator diameter: 0.7 mm),
8
Standard length: 2 m
1.75
*The mounting holes are made of SUS301.
*Refer to Mounting the Sensor on
Moving Parts on page 13 for
details on Robotics Cable
models.
E3T-FT1@ (Receiver)
E3T-FT2@ (Receiver)
Operation indicator
Receiver
lens
(1.3 dia.)
Two, 2.2 dia. *
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
12
Stability indicator
8.6 ^{14 15.8}
3.5
Mounting Holes
Two, M2 holes
8±0.2
3.2
4.4
1.75
8
*The mounting holes are made of SUS301.
14