E2EX1R5E1 Datasheet, PDF (7/35 Pages) Omron Electronics LLC – Your Search for Proximity Sensors Starts with the World-leading Performance and Quality of the E2E

E2E
2-Wire Models
Unshielded DC 2-Wire Models with Self-diagnosis Output [Refer to Dimensions on page 27.]
Appear-
ance
Sensing distance
Connection
method
Cable
specifications
Polar-
ity
Opera-
tion
mode
Pin
arrangement
M12
8 mm
Pre-wired Mod-
els (2 m)
PVC (oil-resistant)
M12 Connector
Models
---
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
Pre-wired Mod-
els (2 m)
PVC (oil-resistant)
---
M18
14 mm
M12 Connector
Models
---
Yes NO _{2: +V and diagnostic output}
3: 0 V
4: +V and control output
Pre-wired Mod-
els (2 m)
PVC (oil-resistant)
---
M30
20 mm
M12 Connector
Models
---
2: +V and diagnostic output
3: 0 V
4: +V and control output
*1. Models with different frequencies are also available. The model number is E2E-X @MD15S (example: E2E-X8MD15S 2M).
*2. Refer to page 22 for details.
Applicable
connector
code *2
---
D
---
D
---
D
Model
E2E-X8MD1S 2M *1
E2E-X8MD1S-M1
E2E-X14MD1S 2M *1
E2E-X14MD1S-M1
E2E-X20MD1S 2M *1
E2E-X20MD1S-M1
Connector Pin Assignments of DC 2-Wire Models
• The connector pin assignments of each New E2E DC 2-Wire Model
conform to IEC 947-5-2 Table III. (Only DC 2-Wire Models have
been changed in comparison to the previous models.)
• The following models with conventional connector pin assignments
are available as well. (Only NO Models can be used.)
The cable at the right should also be used if the XW3A-P@45-G11
Connector Junction Box is already being used.
Cable length
Model
500 mm XS2W-D421-BY1
Internal Wiring
(Proximity Sensor end)
1
4
(Wired end)
4
3
Models with conventional connector pin assignments are available as well.
Appearance
M8
Shielded _M12
NO
E2E-X2D1-M1
E2E-X3D1-M1
Model
Applicable connector code *
NC
C
E2E-X2D2-M1
C
E2E-X3D2-M1
M18
E2E-X7D1-M1
C
E2E-X7D2-M1
M30
E2E-X10D1-M1
C
E2E-X10D2-M1
M8
Unshielded _M12
E2E-X4MD1-M1
E2E-X8MD1-M1
C
E2E-X4MD2-M1
C
E2E-X8MD2-M1
M18
E2E-X14MD1-M1
C
E2E-X14MD2-M1
M30
E2E-X20MD1-M1
C
E2E-X20MD2-M1
* Refer to page 22 for details.
Applicable connector code *
D
D
D
D
D
D
D
D
7