E2A-M18KN16-WP-C12M Datasheet, PDF (4/48 Pages) Omron Electronics LLC – Master Selection Guide

Photoelectric Sensors
E3Z
Dimensions mm (in) 31 H x 10.8 W x 20 D
(1.22 x 0.43 X 0.79)
Amplifier type Built-in DC amplifier
Features
• Sub-miniature sensor offers
long sensing distances and
high noise immunity
• IP67 rated
• Connector models available
E3Z-LS
31 H x 10.8 W x 20 D
(1.22 x 0.43 x 0.79)
Built-in DC amplifier
• Foreground/background
suppression
• Pre-wired 2 m cable or
M8 connector
• Distance settable
• Stable sensing regardless
of target’s color
Through-beam sensing 15 m (49.2 ft)
distance
Retroreflective sensing 4 m (13.12 ft)
distance
Diffuse reflective sensing 1 m (3.28 ft) or
distance 5 to 100 mm (0.2 to 3.94 in)
Color sensing –
Supply voltage 12 to 24 VDC
AC control output –
DC control output type NPN or PNP
Max. load 100 mA
Alarm –
Response time 1 ms max.
Materials:
Lens
Case
Bracket
Cover
Denatured polyallylate
PBT plastic
–
–
Enclosure rating IP67, 1200 PSI (NEMA ICS5,
ANNEXF)
Light source Pulse modulated infrared LED (860
nm) or visible red LED (680 nm)
Circuit protection Load short circuit and reverse
polarity
Mutual interference On all except through-beam
protection models
Operation mode Light-ON / Dark-ON switch
selectable
Applications
General purpose sensing;
Sub-miniature, long detection
distances, noise immunity;
IP67 rated; CE approved
–
–
20 mm to 200 mm (BGS)
40 mm to 200 mm (FGS)
–
12 to 24 VDC
–
NPN or PNP
100 mA max.
–
Operation or reset: 1 ms max.
Denatured polyallylate
PBT plastic
–
–
IEC 60529 IP67, 1200 PSI
(NEMA ICS5, ANNEXF)
Red LED (680 nm)
Reverse polarity, output
short-circuit
Yes
Light-ON / Dark-ON switch
selectable
General purpose; Material
handling; Packaging;
Background suppression
E3Z-B
31 H x 10.8 W x 20 D
(1.22 x 0.43 x 0.79)
Built-in DC amplifier
• Detects PET bottles
–
500 mm – 2 m
depends on reflector
–
–
12 to 24 VDC
–
NPN or PNP
100 mA max.
–
Operation or reset: 1 ms max.
Denatured polyallylate
PBT plastic
–
–
IEC 60529 IP67, 1200 PSI
(NEMA ICS5, ANNEXF)
Red LED (680 nm)
Reverse polarity, output
short-circuit
Yes
Light-ON / Dark-ON switch
selectable
PET bottles and transparent
objects
E3T
19 H x 12 W x 4 D
(0.74 x 0.47 x 0.15)
Built-in DC amplifier
• Micro-miniature space saving
• Watertight IP67
• Pinpoint beam for detection
of extremely small targets
• 1 meter range
• Hyper LED smallest visible
red LED
• Flat and rectangular body styles
• CE conformance
1 m (3.28 ft)
Polarized: 200 mm
(7.88 in)
30 mm (1.18 in) 15 mm on
certain convergent beam models
–
12 to 24 VDC
–
NPN or PNP
50 mA max. at 24 VDC
–
2 ms ON/OFF
Polycarbonate
PBT plastic
–
Polycarbonate
IP67
Red "Pin Point" LED (670 nm)
Load short circuit and reverse
polarity
On all except through-beam
models
Light-ON / Dark-ON
separate models
Flat or rectangular micro-
miniature package; Washdown
environments; Pinpoint beam
for extremely small target
detection; CE conformance;
Latest generation technologies
2