E2A-M18KN16-WP-C12M Datasheet, PDF (14/48 Pages) Omron Electronics LLC – Master Selection Guide

Photoelectric Sensors
E3S-LS3N
E3C-V
E3HF
F3C-AA41
Dimensions mm (in) 19.0 H x 10.0 W x 34.0 D
(0.79 x 0.39 x 1.33)
Amplifier type Printed circuit board sensor
Features • Stable detection without being
affected by holes or notches
• Will detect any color PC board
Through-beam sensing –
distance
Retroreflective sensing –
distance
Diffuse reflective sensing 10 – 60 mm
distance
Color sensing Yes
Supply voltage 12 to 24 VDC ±10% Ripple max.
AC control output –
DC control output type NPN
Max. load 50 mA
Alarm –
Response time 1 ms
Materials:
Lens Acrylic
Case ABS
Bracket –
Cover –
Enclosure rating IP40
Light source Red LED
Circuit protection –
Mutual interference –
protection
Operation mode Light-ON
Applications PC board detection
1142
E3C-VS1G/ E3C-VS3R:
15 H x 10 W x 28 D
(0.59 x 0.39 x 1.10)
E3C-VM35R/ E3C-VS7R:
20 H x 10 W x 47 D
(0.78 x 0.39 x 1.85)
Pinpoint/mark sensing head
(Use separate amplifier)
• Accurately detects color marks
against many different
backgrounds
• Pinpoint beam enables it to
detect small objects, marks and
wires as small as 0.2 mm
–
28 H x 50 W x 7 D
(1.10 x 1.97 x 0.28)
Built-in DC amplifier
• Thin profile 7 mm thick flat
pack style sensor
• Can detect 0.5 mm (0.02 in)
objects with included slits
• Light-ON or Dark-ON
versions
• Top and side through holes
for easy mounting
1 m (3.28 ft)
90 H x 18 W x 45 D
(3.54 x 0.70 x 1.77)
Roller conveyor sensor
• Detects objects from
underneath roller conveyor
• M12 connector
• Unique optical system for
setting distance, eliminates
background influences
–
–
–
–
E3C-VS1G: 10 ±2 mm
E3C-VS3R: 30 ±5 mm
E3C-VM35R: 35 ±5 mm (mark)
20 to 80 mm (spot)
E3C-VS7R: 70 ±10 mm (mark)
40 to 110 mm (spot)
Yes
See E3C amplifiers
See E3C amplifiers
See E3C amplifiers
See E3C amplifiers
See E3C amplifiers
See E3C amplifiers
E3C-VS1G/VS3R: Plastic, polycarb.;
E3C-VM35R/VS7R: Glass
Plastic
–
–
E3C-VS1G/VS3R: IP64
E3C-VM35R/VS7R: IP50
E3C-VS1G: Pulse modulated
Green LED
E3C-VS3R/VM35R/VS7R: Pulse
modulated Red LED
See E3C amplifiers
See E3C amplifiers
50 mm (1.97 in)
–
12 to 24 VDC
–
NPN with pull-up resistor
NPN 80 mA relay sink logic
NPN 3 mA voltage source logic
–
6 ms ON/OFF or 10 ms ON/OFF
on some models
Plastic
Plastic
–
–
NEMA 1, 3, 4X, 12 IP64
Pulse modulated infrared LED
Reverse polarity and load short
circuit
–
0 to 750 mm
–
10 to 30 VDC
–
NPN or PNP
150 mA
–
10 ms max.
Acrylic
ABS
–
–
IP40
Infrared LED
Load short circuit and reverse
polarity
Yes
See E3C amplifiers
Color mark applications,
inspection and accurate
positioning
Light-ON / Dark-ON
separate versions
Light-ON / Dark-ON selectable
Thin profile 7 mm photoelectric
sensor; Ideal for space
constrained applications; Good
for small object detection
Packaging, roller conveyor
object detection, material
handling