D2SW-P Datasheet, PDF (3/8 Pages) Omron Electronics LLC – Sealed Subminiature Basic Switch

Dimensions
■ Terminals
Note: 1. All units are in millimeters unless otherwise indicated.
2. Terminal plate thickness is 0.5 mm for all models.
Solder Terminals
C
7.3
NC
NC
3.3±^0.1
3.2
2.15
8.55
15.5
5.15 9.5±^0.1
19.8±^0.2
Three, 1.6-dia. Holes 0.5
6.4±0.2
PCB Terminals (Uneven pitch)
1.85
8.8±0.2
16.1±^0.2
5.15 9.5±^0.1
19.8±^0.2
3.3±0.1
3-1.2
3-0.8
1.8
3.9
1.3
0.5
6.4±0.2
PCB Mounting Dimensions (Reference)
16.1±^0.1
8.8±^0.1
Three,-1.35 to 1.5 dia.
Molded Lead Wires
Quick-connect Terminals (#110)
11
7.1
3.3±^0.1
7.6±0.2 7.6±0.2
5.15 9.5±^0.1
19.8±^0.2
3-2.8
0.5
6.4±^0.2
PCB Terminals (Even pitch)
3.3±0.1
5.15 9.5±0.1
7.62±0.2 7.62±0.2
19.8±0.2
3-1.2
3-0.8
1.8
3.9
1.3
0.5
6.4±^0.2
PCB Mounting Dimensions (Reference)
7.62±0.1 7.62±0.1 _{Three, 1.35 to 1.5 dia.}
Common terminal (black)
Insulator
Stranded annealed
copper wites
0.7
5.15 9.5±0.1
21.2
9.2
300±¹⁰
6.4±^0.2
Normally closed
terminal (red)
(5)
Normally open
terminal (blue)
■ Mounting Holes
All switches may be panel mounted using M2.3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.23 to 0.26 N·m
Exceeding the specified torque may result in deterioration of the
sealing or damage.
Two, M2.3 screw hole
9.5±^0.1
Sealed Subminiature Basic Switch D2SW-P 203