D2SW-P Datasheet, PDF (1/8 Pages) Omron Electronics LLC – Sealed Subminiature Basic Switch

Sealed Subminiature Basic Switch
D2SW-P
Sealed Basic Switch with Simplified
Construction, Mounting Compatible with
SS and D2SW Series.
• Sealed to IEC IP67.
• Switch rating of 2A at 250 VAC possible with a single-leaf
movable spring. Models for micro loads are also available.
• Solder, quick-connect terminals (#110), PCB terminals and
molded lead wires are available. Even-pitched PCB
terminals are also standardized.
Ordering Information
Rating Actuator
2A
Pin plunger
Hinge lever
Hinge roller lever
Terminal
Solder
terminals
D2SW-P2H
D2SW-P2L1H
Quick-connect
terminals (#110)
D2SW-P2T
D2SW-P2L1T
PCB terminals
Uneven pitch
D2SW-P2D
D2SW-P2L1D
Even pitch
D2SW-P2B
D2SW-P2L1B
D2SW-P2L2H D2SW-P2L2T
D2SW-P2L2D D2SW-P2L2B
Molded lead
wires
D2SW-P2M
D2SW-P2L1M
D2SW-P2L2M
Simulated roller lever
0.1A
Pin plunger
Hinge lever
Hinge roller lever
D2SW-P2L3H D2SW-P2L3T
D2SW-P01H D2SW-P01T
D2SW-P01L1H D2SW-P01L1T
D2SW-P01L2H D2SW-P01L2T
D2SW-P2L3D D2SW-P2L3B D2SW-P2L3M
D2SW-P01D D2SW-P01B
D2SW-P01M
D2SW-P01L1D D2SW-P01L1B D2SW-P01L1M
D2SW-P01L2D D2SW-P01L2B D2SW-P01L2M
Simulated roller lever
D2SW-P01L3H D2SW-P01L3T D2SW-P01L3D D2SW-P01L3B D2SW-P01L3M
Note: Consult your OMRON sales representative for details on SPST-NO and SPST-NC models.
Model Number Legend
D2SW-P
1 234
1. Ratings
2: 2 A at 250 VAC
01: 0.1 A at 30 VDC
2. Actuator
3. Contact Form
None: Pin plunger
None: SPDT
L1: Hinge lever
-2: SPST-NC*
L2: Hinge roller lever
-3: SPST-NO*
L3: Simulated roller lever
*Lead wire versions only
4. Terminals
H: Solder terminals
T: Quick-connect terminals (#110)
D: PCB terminals (Uneven pitch)
B: PCB terminals (even pitch)
M: Molded lead wires
Sealed Subminiature Basic Switch D2SW-P 201