G3VM-6 Datasheet, PDF (2/6 Pages) Omron Electronics LLC – Technical Information

Precautions
!WARNING
Be sure to turn OFF the power when wiring the Relay, otherwise
an electric shock may be received.
!WARNING
Do not touch the charged terminals of the SSR, otherwise an elec-
tric shock may be received.
!CAUTION
Do not apply overvoltage or overcurrent to the I/O circuits of the
SSR, otherwise the SSR may malfunction or burn.
!CAUTION
Be sure to wire and solder the Relay under the proper soldering
conditions, otherwise the Relay in operation may generate exces-
sive heat and the Relay may burn.
!CAUTION
Electrostatic sensitive devices. Keep in original packaging until re-
quired to use. Avoid touching device terminals. Take static han-
dling precautions during processing.
Appearance Examples
DIP (Dual Inline Package)
OMRON logo
Model name
LOT No.
SOP (Small Outline Package)
OMRON logo
Model name
LOT No.
SSOP (Shrink Small Outline Package)
211
OMRON mark
228
Model name
LOT No.
Note: "G3VM" is not printed on the
actual product.
Typical Relay Driving Circuit Examples
C-MOS
Load
Transistor
10 to 100 kΩ
Load
Use the following formula to obtain the LED current limiting resis-
tance value to assure that the relay operates accurately.
VCC − VOL − VF (ON)
R1 =
5 to 20 mA
Use the following formula to obtain the LED forward voltage value to
assure that the relay releases accurately.
VF (OFF) = VCC − VOH < 0.8 V
■ Protection from Surge Voltage on the
Input Terminals
If any reversed surge voltage is imposed on the input terminals,
insert a diode in parallel to the input terminals as shown in the follow-
ing circuit diagram and do not impose a reversed voltage value of 3 V
or more.
Surge Voltage Protection Circuit Example
2
MOS FET Relays Technical Information