S8AS Datasheet, PDF (14/26 Pages) Omron Electronics LLC – Smart Power Supply

S8AS
Key Operations and Displays in Each Mode
Power ON
• First startup after purchase.
• When power was turned
OFF in any mode except
Test Mode.
Run Mode
*3
Setting Mode
Output voltage
display
Total Current
Display
*1
Output Current
Display
*1
Peak Output
Current Display
Maintenance Forecast
Monitor Output Display
Temperature
Display
Clearing selected
peak output current.
or no key operation for
more than 3 s.
Press for 3 s.
*2
Current tripping
threshold
Value Setting
No key operation for more than 3 s.
Current tripping
type
Selection of Standard,
Instantaneous, or
Extended Detection
No key operation for more than 3 s.
Undervoltage
detection threshold
Value Setting
No key operation for more than 3 s.
Over-temperature
output threshold
Value Setting
No key operation for more than 3 s.
Startup Sequence
Time Setting *2
Time Setting
No key operation for more than 3 s.
Shutdown Sequence
Time Setting *2
Time Setting
No key operation for more than 3 s.
External Tripping
Input Setting *2
Enable/Disable
Setting
No key operation for more than 3 s.
External Tripping
Trigger Type
Selection of Tripping
Trigger Type: EGE/LVL
No key operation for more than 3 s.
Communications Settings
(Models with
communications only)
Settings
No key operation for more than 3 s.
Select reset
method
Selection of
Method
No key operation for more than 3 s.
When power was turned
OFF in Test Mode
Test Mode
Individual branch outputs
*1, *2
Connected
Cut off
Cut off all branch outputs
(Shutdown Sequence)
Execute
Connect all branch outputs
(Startup Sequence)
Execute
Mode Selection Menu
Press for 3 s.
Press for 3 s.
Select Run Mode
*3
Select Setting Mode
Select Test Mode
*3
Select Protection level
*3
Initialize Parameters
Press for 3 s.
Level Selection
Press for 3 s.
Yes, initialize.
*1. Branch outputs can be changed using the Down ( ) Key. The changes to the branch outputs will be retained in other displays as well.
*2. Settings are displayed in order for branch outputs. Specific branch output settings have been omitted.
*3. Not displayed for the S8AS-24006N/48008N.
14