X-10G Datasheet, PDF (1/8 Pages) Omron Electronics LLC – General-purpose Basic Switch

General-purpose Basic Switch
X
Direct Current Switch with Built-in
Magnetic Blowout
• Incorporates a small permanent magnet in the contact
mechanism to deflect the arc to effectively extinguish it.
• Ideal for switching DC circuits
• Wide variety of actuators for a wide scope of applications
• Same shape and mounting procedures as Omron’s Model
Z snap action switches.
Ordering Information
Actuator
Pin plunger
Terminal
Solder
terminal
Model
X-10G
Screw
terminal
Model
X-10G-B
Actuator
Hinge lever
Terminal
Solder
terminal
Model
X-10GW
Screw
terminal
Model
X-10GW-B
Slim spring plunger
Short spring plunger
Panel mount plunger
X-10GS
X-10GD
X-10GQ
X-10GS-B
X-10GD-B
X-10GQ-B
Low-force hinge lever
Short hinge roller
lever
Hinge roller lever
X-10GW4
X-10GW22
X-10GW2
X-10GW4-B
X-10GW22-B
X-10GW2-B
Panel mount roller
plunger
Panel mount cross
roller plunger
Leaf spring
Short hinge lever
X-10GQ22
X-10GQ21
X-10GL
X-10GW21
X-10GQ22-B
X-10GQ21-B
X-10GL-B
X-10GW21-B
Reverse hinge lever
X-10GM
X-10GM-B
Reverse short hinge
roller lever *
Reverse hinge roller
lever *
X-10GM22
X-10GM2
X-10GM22-B
X-10GM2-B
* The plungers of reverse-type models are continuously pressed by the
compression coil springs and the plungers are freed by operating the levers.
Model Number Legend
X - 10 G -
1 23 4
1. Ratings
10: 10 A (125 VDC)
2. Contact Gap
G: 0.9 mm
3. Actuator
4. Terminals
None: Pin plunger
None: Solder terminal
D: Short spring plunger
B: Screw terminal
S: Slim spring plunger
(with toothed washer)
Q: Panel mount plunger
Q21: Panel mount cross roller plunger
Q22: Panel mount roller plunger
L: Leaf spring
W: Hinge lever
W2: Hinge roller lever
W21: Short hinge lever
W22: Short hinge roller lever
W4: Low-force hinge lever
M: Reverse hinge lever
M2: Reverse hinge roller lever
M22: Reverse short hinge roller lever
General-purpose Basic Switch X 141