PDTA143X Datasheet, PDF (4/12 Pages) NXP Semiconductors – PNP resistor-equipped transistors; R1 = 4.7 kW, R2 = 10 kW

NXP Semiconductors
PDTA143X series
PNP resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ
Table 6. Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
P_tot
total power dissipation
T_amb ≤ 25 °C
PDTA143XE
[1] _-
PDTA143XK
[1] _-
PDTA143XM
[2][3] _-
PDTA143XS
[1] _-
PDTA143XT
[1] _-
PDTA143XU
[1] _-
T_j
junction temperature
-
T_amb
ambient temperature
−65
T_stg
storage temperature
−65
Max
150
250
250
500
250
200
150
+150
+150
Unit
mW
mW
mW
mW
mW
mW
°C
°C
°C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
6. Thermal characteristics
Table 7.
Symbol
R_th(j-a)
Thermal characteristics
Parameter
thermal resistance from
junction to ambient
PDTA143XE
PDTA143XK
PDTA143XM
PDTA143XS
PDTA143XT
PDTA143XU
Conditions
in free air
Min Typ Max
[1] _-
-
833
[1] _-
-
500
[2][3] _-
-
500
[1] _-
-
250
[1] _-
-
500
[1] _-
-
625
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
Unit
K/W
K/W
K/W
K/W
K/W
K/W
PDTA143X_SER_4
Product data sheet
Rev. 04 — 16 April 2007
© NXP B.V. 2007. All rights reserved.
4 of 12