TDA8263HN Datasheet, PDF (3/28 Pages) NXP Semiconductors – Fully integrated satellite tuner

Philips Semiconductors
TDA8263HN
Fully integrated satellite tuner
Table 1:
Symbol
ΦN_osc
SNF_SB
AGC
T_amb
Quick reference data …continued
Parameter
Conditions
Min
oscillator phase noise in 100 kHz offset;
[2] _-
the satellite band
f_comp = 1 MHz
synthesizer noise floor in 1 kHz and10 kHz
[2] _-
the satellite band
offset; f_comp = 1 MHz
amplifier gain control
55
range
ambient temperature
−20
Typ
−100
-
60
-
Max Unit
−94 dBc/Hz
−78 dBc/Hz
-
dB
+85 °C
[1] The product is qualified with an output voltage of 550 mV (p-p) differential, however larger values can be
used at baseband outputs that might have impact on the product performance.
[2] Phase noise in optimal conditions, see related application note.
5. Typical performances
• Noise figure at maximum gain: 8 dB
• High linearity:
– IIP₂ = +2 dBm at −20 dBm input and 2.15 GHz
– IIP₃ = +6 dBm at −20 dBm input and 2.15 GHz.
• Low synthesizer noise floor: −78 dBc/Hz at 1 kHz and 10 kHz offset with
f_comp = 1 MHz
• AGC linearity: < 0.7 dB/step with a 8-bit DAC
• Maximum I/Q amplitude mismatch: 1 dB
• Maximum I/Q quadrature mismatch: 5°
• Symbol rates: from 1 MBd to 45 MBd.
6. Ordering information
Table 2: Ordering information
Type number
Package
Name
Description
TDA8263HN
HVQFN32 plastic thermal enhanced very thin quad flat package; no leads;
32 terminals; body 5 × 5 × 0.85 mm
Version
SOT617-1
9397 750 13193
Product data sheet
Rev. 01 — 14 December 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
3 of 28