TDA8263HN Datasheet, PDF (19/28 Pages) NXP Semiconductors – Fully integrated satellite tuner

Philips Semiconductors
TDA8263HN
Fully integrated satellite tuner
13. Limiting values
Table 37: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). ^[1]
Symbol Parameter
Conditions
Min
V_CC
supply voltage
−0.5
V_I
input voltage
pins SDA, SCL, PORT1 and
−0.3
PORT0
pin RFIN
−0.3
T_amb
T_stg
T_j
t_sc
V_esd
all other pins
V_CC < 3.3 V
V_CC ≥ 3.3 V
operating ambient temperature
storage temperature
junction temperature
short circuit time
electrostatic discharge voltage
human body model
−0.3
−0.3
−20
−40
-
[2] _-
-
[3] _-
pin PORT0 (pin 8)
-
all other pins
-
machine model
[4] _-
Max
Unit
+3.6
V
+5.5
V
V_CC − 0.3 V
V_CC + 0.3 V
+3.6
V
+85
°C
+125
°C
125
°C
10
s
-
-
±1 000
V
±2 000
V
±2 00
V
[1] Maximum ratings cannot be exceeded, not even momentarily without causing irreversible damages to the
IC. Maximum ratings cannot be accumulated.
[2] Each pin to V_CC or GND; except RFIN pin which should never exceed V_CC − 0.3 V.
[3] Test in accordance with JEDEC specification EIA/JESD22-114B.
[4] Test in accordance with JEDEC specification EIA/JESD22-A115-A.
14. Thermal characteristics
Table 38: Thermal characteristics
Symbol Parameter
Conditions
R_th(j-a)
thermal resistance JEDEC 4 layer test board with 9
junction to ambient thermal vias (exposed die pad
soldered on board)
Typ
Unit
43
K/W
15. Characteristics
Table 39: Characteristics
T_amb = 25 °C; V_CC = 3.3 V; output level on differential I/Q output is 550 mV (p-p); unless otherwise specified.
Symbol Parameter
Conditions
Min Typ Max Unit
Supply
V_CC
I_CC
V_POR
supply voltage
supply current
voltage limit when POR is active
3.15 3.3 3.45 V
-
167 -
mA
1.5 -
2.5 V
9397 750 13193
Product data sheet
Rev. 01 — 14 December 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
19 of 28