PDTC143XT.215 Datasheet, PDF (11/17 Pages) NXP Semiconductors – NPN resistor-equipped transistors; R1 = 4.7 kΩ, R2 = 10 kΩ

NXP Semiconductors
11. Soldering
PDTC143X series
NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 10 k
2.2
1.7
solder lands
solder resist
0.85
12
solder paste
0.5
(3×)
occupied area
0.6
(3×)
1.3
Dimensions in mm
sot416_fr
Reflow soldering is the only recommended soldering method.
Fig 16. Reflow soldering footprint PDTC143XE (SOT416/SC-75)
1.3
0.7
R0.05 (12×)
solder lands
0.9
0.25
(2×)
0.3
(2×)
0.4
(2×)
0.6 0.7
0.3
0.4
solder resist
solder paste
occupied area
Dimensions in mm
sot883_fr
Reflow soldering is the only recommended soldering method.
Fig 17. Reflow soldering footprint PDTC143XM (SOT883/SC-101)
PDTC143X_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 11 — 9 December 2011
© NXP B.V. 2011. All rights reserved.
11 of 17