DS90LV110AT Datasheet, PDF (7/9 Pages) National Semiconductor (TI) – 1 to 10 LVDS Data/Clock Distributor with Failsafe

Multi-drop Applications
20098202
Point-to-Point Distribution Applications
20098203
For applications operating at data rate greater than 400Mbps, a point-to-point distribution application should be used. This
improves signal quality compared to multi-drop applications due to no stub PCB trace loading. The only load is a receiver at the
far end of the transmission line. Point-to-point distribution applications will have a wider LVDS bus lines, but data rate can
increase well above 400Mbps due to the improved signal quality.
7
www.national.com