|
PC87382 Datasheet, PDF (59/72 Pages) National Semiconductor (TI) – LPC-to-LPC Switch for Docking Stations, with Fast Infrared Port, Serial Port and GPIOs | |||
|
◁ |
8.0 Device Characteristics (Continued)
8.1.3 Capacitance
Symbol
Parameter
CLCLK LCLK Pin Capacitance
CPIN Other Pins Capacitance
1. TA = 25°C, f = 1 MHz
2. Not tested. Guaranteed by design
Min2 Typ1 Max2 Unit
5
8
12
pF
8
10
pF
8.1.4 Power Consumption under Recommended Operating Conditions
Symbol
Parameter
Conditions
Typ
IDD
VDD Average Main Supply Current VIL = 0.5 V, VIH = 2.4 V
No Load
8
IDDLP
VDD Quiescent Main Supply Current
in Low Power Mode
VIL = VSS, VIH = VDD
No Load
1.5
Max
10
2
Unit
mA
mA
8.1.5 Voltage Thresholds
Symbol
Parameter1
VDDON
VDD Detected as Power-on
VDDOFF
VDD Detected as Power-off
1. All parameters speciï¬ed for 0°C ⤠TA ⤠70°C.
2. Not tested. Guaranteed by characterization.
Min2
Typ
Max2
Unit
2.2
2.6
2.9
V
2.1
2.5
2.8
V
8.2 DC CHARACTERISTICS OF PINS, BY I/O BUFFER TYPES
The following tables summarize the DC characteristics of all device pins described in the Chapter 1.2 on page 9. The char-
acteristics describe the general I/O buffer types defined in Table 1. For exceptions, refer to Section 8.2.8. The DC charac-
teristics of the system interface meet the PCI2.2 3.3V DC signaling.
8.2.1 Input, PCI 3.3V
Symbol: INPCI
Symbol
Parameter
Conditions
Min
Max Unit
VIH Input High Voltage
0.5VDD VDD + 0.51 V
VIL Input Low Voltage
â0.51
0.3VDD
V
lIL2 Input Leakage Current
0 < Vin < VDD
±1
µA
1. Not tested. Guaranteed by design.
2. Input leakage currents include hi-Z output leakage for all bidirectional buffers with TRI-STATE outputs.
Revision 1.2
59
www.national.com
|
▷ |