LP3928 Datasheet, PDF (11/11 Pages) National Semiconductor (TI) – High Speed Bi-Directional Level Shifter and Ultra Low-Dropout CMOS Voltage Regulator

Physical Dimensions inches (millimeters) unless otherwise noted
micro SMD, 16 Bump
NS Package Number TLA16AAA
The Dimensions for X1, X2 and X3 are as follows:
X1 = 1.996mm
X2 = 1.996mm
X3 = 0.600mm
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
www.national.com
National Semiconductor
Europe Customer Support Center
Fax: [phone]
Email: [e-mail]
Deutsch Tel: [phone]
English Tel: [phone]
Français Tel: [phone]
National Semiconductor
Asia Pacific Customer
Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.