|
LP3918 Datasheet, PDF (1/30 Pages) National Semiconductor (TI) – Battery Charge Management and Regulator Unit | |||
|
October 2007
LP3918
Battery Charge Management and Regulator Unit
General Description
The LP3918 is a fully integrated charger and multi-regulator
unit designed for CDMA cellular phones. The LP3918 con-
tains a Li-Ion battery charger, 7 low noise low dropout (LDO)
voltage regulators and a high-speed serial interface to pro-
gram on/off conditions and output voltages of individual reg-
ulators, and also to read status information from the PMU.
The Li-Ion charger integrates a power FET, reverse current
blocking diode, sense resistor with current monitor output,
and requires only a few external components. Charging is
thermally regulated to obtain the most efficient charging rate
for a given ambient temperature.
LDO regulators provide high PSRR and low noise ideally suit-
ed for supplying power to both analog and digital loads.
Applications
â CDMA Phone Handsets
â Low Power Wireless Handsets
â Handheld Information Appliances
â Personal Media Players
â Digital Cameras
Features
â Fully integrated Li-Ion battery charger with thermal
regulation
â USB Charge Mode.
â 7 Low Noise LDOâs
2 x 300 mA
3 x 150 mA
2 x 80 mA
â I2C compatible interface for controlling LDO outputs and
charger operation
â Thermal shutdown
â Under Voltage Lockout
â 25-bump Thin micro-SMD package 2.5 x 2.5 mm
â Options available on request, please contact sales office
for further information;
- Level detect on HF_PWR & PWR_ON
- LDO Charging mode
- Custom Default Settings on Charger, and LDO O/P's.
Key Specifications
â 50mA to 950mA Programmable Charge Current
â 3.0V to 5.5V Input Voltage Range
â 200mV typ. Dropout Voltage on 300 mA LDOâs
â 2% (typ) Output Voltage Accuracy on LDOâs
Simplified Functional Block Diagram
© 2007 National Semiconductor Corporation 202116
20211601
www.national.com
|
▷ |